NCCER MODULE 4 REVIEW EXAM
QUESTIONS AND ANSWERS
1. The electromagnetic drill is a a. handheld drill used on wood b. cordless drill used on
masonry and tile c. portable drill used on thick metal d. pneumatic drill that has a
pounding action - Answer-c. portable drill used on thick metal
2. Hammer drills are designed to drill into a. wood, metal, and plastic b. concrete, brick,
and tile c. drywall, fiberglass, and wood d. roofing shingles, plastic, and wood - Answer-
b. concrete, brick, and tile
3. Pneumatic tools get their power from a. air pressure b. fluid pressure c. hand pumps
d. AC power sources - Answer-a. air pressure
4. The most common use of the power drill is to a. cut wood, metal, and plastic b. drive
nails into wood, metal, and plastic c. make holes in wood, metal, and plastic d. carve
letters in wood, metal, and plastic - Answer-c. make holes in wood, metal, and plastic
5. A masonry bit is able to drill into concrete and similar material because it has a a.
countersink shank b. ceramic core c. whip check d. carbide tip - Answer-d. carbide tip
6. An example of an electric power drill that is designed to be used in tight spaces is
a(n) a. electromagnetic drill b. right-angle drill c. hammer drill d. keyless chuck drill -
Answer-b. right-angle drill
7. A pneumatic impact wrench requires the use of a. impact sockets that are designed
for applicable tool b. an adapter so that handheld sockets fit c. shear pins between the
wrench and the socket d. a trigger lock to prevent accidental Starting - Answer-a. impact
sockets that are designed for applicable tool
8. When cutting with a circular saw, grip the saw handles a. and pull the saw toward you
b. firmly with one hand c. and engage the trigger lock d. firmly with two hands - Answer-
d. firmly with two hands
9. The high speed setting on a reciprocating saw is used for a. cutting through drywall b.
metal work c. sawing wood and other soft materials d. grinding surfaces - Answer-c.
sawing wood and other soft materials
10. When using a saber saw, avoid vibration by a. using a low-speed setting b. using a
clamp or vise to hold the work c. setting a heavy object on the workpiece d. holding the
workpiece down with your free hand - Answer-b. using a clamp or vise to hold the work
11. Before using a reciprocating saw to cut through a wall or partition, always a. find out
what is on the other side b. remove the lower blade guard c. increase the revolutions
QUESTIONS AND ANSWERS
1. The electromagnetic drill is a a. handheld drill used on wood b. cordless drill used on
masonry and tile c. portable drill used on thick metal d. pneumatic drill that has a
pounding action - Answer-c. portable drill used on thick metal
2. Hammer drills are designed to drill into a. wood, metal, and plastic b. concrete, brick,
and tile c. drywall, fiberglass, and wood d. roofing shingles, plastic, and wood - Answer-
b. concrete, brick, and tile
3. Pneumatic tools get their power from a. air pressure b. fluid pressure c. hand pumps
d. AC power sources - Answer-a. air pressure
4. The most common use of the power drill is to a. cut wood, metal, and plastic b. drive
nails into wood, metal, and plastic c. make holes in wood, metal, and plastic d. carve
letters in wood, metal, and plastic - Answer-c. make holes in wood, metal, and plastic
5. A masonry bit is able to drill into concrete and similar material because it has a a.
countersink shank b. ceramic core c. whip check d. carbide tip - Answer-d. carbide tip
6. An example of an electric power drill that is designed to be used in tight spaces is
a(n) a. electromagnetic drill b. right-angle drill c. hammer drill d. keyless chuck drill -
Answer-b. right-angle drill
7. A pneumatic impact wrench requires the use of a. impact sockets that are designed
for applicable tool b. an adapter so that handheld sockets fit c. shear pins between the
wrench and the socket d. a trigger lock to prevent accidental Starting - Answer-a. impact
sockets that are designed for applicable tool
8. When cutting with a circular saw, grip the saw handles a. and pull the saw toward you
b. firmly with one hand c. and engage the trigger lock d. firmly with two hands - Answer-
d. firmly with two hands
9. The high speed setting on a reciprocating saw is used for a. cutting through drywall b.
metal work c. sawing wood and other soft materials d. grinding surfaces - Answer-c.
sawing wood and other soft materials
10. When using a saber saw, avoid vibration by a. using a low-speed setting b. using a
clamp or vise to hold the work c. setting a heavy object on the workpiece d. holding the
workpiece down with your free hand - Answer-b. using a clamp or vise to hold the work
11. Before using a reciprocating saw to cut through a wall or partition, always a. find out
what is on the other side b. remove the lower blade guard c. increase the revolutions
