00104 NCCER ASSESSMENT TEST
QUESTIONS WITH CORRECT ANSWERS
Burr bits - Answer-a grinder can catch on rough material edges and shift around
especially when you are using rotary bits called
A powder actuated tool - Answer-a low velocity fastening system that is used to drive
steel pins or threaded studs into masenary and steel is ________________
Powder actuated fasteng tool - Answer-specific training is required to use any kind of
_____________
Read the manufacture's instructions - Answer-before using a pneumatically powered
nailer for the first time be sure to _______________
Disconnect the air hose - Answer-if a pnuematic nailer is not firing properly before
attempting repair be sure to ____________________
Pavement breaker - Answer-a power tool that is well suited for breaking up concrete
during demolition work is called _____________
Hydraulic tool - Answer-a porta power is an example of an ____________
Trigger lock - Answer-When using power tools t=you never engage the
______________
disconnect the power source - Answer-before replacing things like bits, blades, discs or
any tool you must
drill bit - Answer-most hammer drills will not hammer unless pressure is applied to the
________
a power source is unavailable - Answer-a pnuematic drill is commonly used when
_______________
the guard protects you from touching the blade - Answer-never use a circular saw that
doesn’t have an upper blade guard because _______________.
kerf - Answer-when using a circular saw be sure to cut on the waist side of the cut mark
to allow for the blade's ____
saber saws - Answer-saw with fine blades that are excellent for intricate cutting are
called __________.
QUESTIONS WITH CORRECT ANSWERS
Burr bits - Answer-a grinder can catch on rough material edges and shift around
especially when you are using rotary bits called
A powder actuated tool - Answer-a low velocity fastening system that is used to drive
steel pins or threaded studs into masenary and steel is ________________
Powder actuated fasteng tool - Answer-specific training is required to use any kind of
_____________
Read the manufacture's instructions - Answer-before using a pneumatically powered
nailer for the first time be sure to _______________
Disconnect the air hose - Answer-if a pnuematic nailer is not firing properly before
attempting repair be sure to ____________________
Pavement breaker - Answer-a power tool that is well suited for breaking up concrete
during demolition work is called _____________
Hydraulic tool - Answer-a porta power is an example of an ____________
Trigger lock - Answer-When using power tools t=you never engage the
______________
disconnect the power source - Answer-before replacing things like bits, blades, discs or
any tool you must
drill bit - Answer-most hammer drills will not hammer unless pressure is applied to the
________
a power source is unavailable - Answer-a pnuematic drill is commonly used when
_______________
the guard protects you from touching the blade - Answer-never use a circular saw that
doesn’t have an upper blade guard because _______________.
kerf - Answer-when using a circular saw be sure to cut on the waist side of the cut mark
to allow for the blade's ____
saber saws - Answer-saw with fine blades that are excellent for intricate cutting are
called __________.
