TASER 26 QUESTIONS AND ANSWERS 100% SOLVED

TASER 26 QUESTIONS AND ANSWERS
100% SOLVED

The X26P power source is called a Performance Power Magazine or PPM. There are
several versions of the PPM available. TRUE OR FALSE - answer TRUE

The Automatic-Shutdown Performance Power Magazine (APPM) automatically stops
the
TASER cycle after 5 seconds even if the trigger is held down. T/F - answer True

When the X26P CID displays a Critical Fault icon, the X26P must be removed from
service immediately and returned to TASER for repair. T/F - answerTrue

If the trigger on an X26P (without an APPM installed) is held down beyond 5 seconds: -
answerThe electrical discharge will continue until the trigger is released

If the safety switch of the X26P is put in the down (SAFE) position during the discharge
cycle: - answerThe cycle will stop immediately

When conducting a daily spark/functionality test, in addition to visually inspecting the arc
you should - answerCheck the CID for any fault icons

The program required to download the firing records from the X26P is called: -
answerEVIDENCE Sync

The X26P uses TASER cartridges. T/F - answerTrue

If an X26P has a PPM, TPPM, or TASER Cam (without auto-shutdown) for a power
source, and the trigger is held down beyond the 5-second cycle, the X26P will continue
to
cycle until the trigger is released or the battery drains. T/F - answerTrue

- answer