(QUESTIONS + ANSWERS)
SOLVED 100% CORRECT!!!
A logistics company wants to streamline its workflow and track shipments as they move
in and around its facilities without barcode scanners. What type of personal area
networking solution would best suit this requirement?
NFC
Wi-Fi 5
Bluetooth
RFID -Answer-RFID
A server system uses a method where each transfer performs a hash calculation on the
data value and stores it as an 8-bit checksum. This can detect and correct single-bit
errors and allow the PC to continue functioning normally. What is this method called
Dual-channel
Virtual RAM
SODIMM
ECC RAM -Answer-ECC Ram
Which of the following causes the ink in an inkjet printer to break up into small pumps,
which give an electrical charge when they leave the print head and can either stick to
the paper or fall off?
Imaging drum
Epson design
Thermal method
Transfer roller -Answer-Epson Design
Which of the following allows reducing the number of cables to the minimum required to
minimize clutter within the chassis and improve airflow and cooling
Heat sink
Redundant power supply
Modular power supply
Thermal pad -Answer-Modular power supply
The TIA/EIA-568-C Commercial Building Telecommunications Cabling Standards have
specific recommendations for health care facilities with Power over Ethernet (PoE)
, 802.3bt installations, and for running distribution system cable to wireless access points.
Which Cat does this refer to
Cat 6
Cat 5e
Cat 6a
Cat 5 -Answer-Cat 6A
A company is looking for computers with accelerated graphic capabilities and large,
high-resolution monitors. Which of the following would meet the company's needs?
Server-class
Workstation
Mobile
Desktop -Answer-Workstation
A new IT support technician troubleshoots a user's report of intermittent network
connectivity. After inspecting the workstation, they see a label above the station's RJ-45
port wall connection. This label is likely to identify what device?
Switch
Patch panel
Hub
Firewall -Answer-Patch panel
A network technician installs wireless access points (APs) in an office and would like to
use the power over Ethernet (PoE) features available. The specific model of APs
available requires a draw of 20W with a minimum current of 450 mA. Which Institute of
Electrical and Electronics Engineers (IEEE) PoE standard best suits this requirement?
802.3bt
802.11ac
802.3af
802.3at -Answer-802.3at
What component in a fused deposition model (FDM) 3-D printer is usually heated to
prevent the material from warping?
Fan
Filament
Extruder
Print Bed -Answer-Print Bed
A technician did not install the full complement of modules, which would allow the
system to revert to as many channels as are populated. What types of channels would
allow this to happen? (Select all that apply.)