Page |1
CIP LEVEL 2 NACE-CIP2-001 PRACTICE TEST EXAM
2025| BRAND NEW EXAM QUESTIONS WITH 100%
CORRECT SOLUTIONS | GUARANTEED SUCCESS|
ACE YOUR GRADES.
You are working as an inspector in a galvanizing plant for the first time.
What are some of the hazards you need to be aware of: - Correct Answer-
A. Risk of chemical exposure
B. Risk of skin
C. Risk of acid or caustic splashes
D. a), b), and c)
Answer: D
You are working as the only in-house NACE Level 2 Inspector in a shop
setting when an independent 3rd party NACE Level 3 Inspector,
representing the owner, presents you with a copy of a Non Conformance
Report (NCR) he has written for a NACE2/SSPC SP 10 centrifugal blast
which you had previously approved.
Your FIRST preferred course of action is to: - Correct Answer-A. Verbally
challenge the NCR
B. Request a re-blast of the item in question
C. Consult your supervisor
D. Review the NCR with the other Inspector
Answer: C
, Page |2
An Inspection and Test Plan is required when: - Correct Answer-
A. It is always required
B. When the Coating Applicator requests one
C. When the Owner specifies one
D. When the Inspector requests one
Answer: A
The Inspectors' goal at the Pre-Job Conference is to: - Correct Answer-
A. Obtain a clear understanding of the Specification
B. Discuss contractual requirements
C. Manage the meeting so it doesn't go off topic
D. Take accurate meeting minutes for distribution
Answer: A
Coating Surveys are legally required: - Correct Answer-
A. On commercial marine vessels and offshore platforms
B. On high pressure gas lines and fireproofed structures
C. On water tanks and potable water pipelines
D. On food and beverage vessels and can linings
CIP LEVEL 2 NACE-CIP2-001 PRACTICE TEST EXAM
2025| BRAND NEW EXAM QUESTIONS WITH 100%
CORRECT SOLUTIONS | GUARANTEED SUCCESS|
ACE YOUR GRADES.
You are working as an inspector in a galvanizing plant for the first time.
What are some of the hazards you need to be aware of: - Correct Answer-
A. Risk of chemical exposure
B. Risk of skin
C. Risk of acid or caustic splashes
D. a), b), and c)
Answer: D
You are working as the only in-house NACE Level 2 Inspector in a shop
setting when an independent 3rd party NACE Level 3 Inspector,
representing the owner, presents you with a copy of a Non Conformance
Report (NCR) he has written for a NACE2/SSPC SP 10 centrifugal blast
which you had previously approved.
Your FIRST preferred course of action is to: - Correct Answer-A. Verbally
challenge the NCR
B. Request a re-blast of the item in question
C. Consult your supervisor
D. Review the NCR with the other Inspector
Answer: C
, Page |2
An Inspection and Test Plan is required when: - Correct Answer-
A. It is always required
B. When the Coating Applicator requests one
C. When the Owner specifies one
D. When the Inspector requests one
Answer: A
The Inspectors' goal at the Pre-Job Conference is to: - Correct Answer-
A. Obtain a clear understanding of the Specification
B. Discuss contractual requirements
C. Manage the meeting so it doesn't go off topic
D. Take accurate meeting minutes for distribution
Answer: A
Coating Surveys are legally required: - Correct Answer-
A. On commercial marine vessels and offshore platforms
B. On high pressure gas lines and fireproofed structures
C. On water tanks and potable water pipelines
D. On food and beverage vessels and can linings
