DANTE LEVEL 2 TEST (ACTUAL 2025-2026)
QUESTIONS WITH 100% CORRECT ANSWERS
A broadcast network transmission: -
<<<Answers>>>>transmits from one to everyone on the
network
Quality of Service (QoS) allows some traffic to be prioritized
over others. When would be a good time to consider engaging
QoS? (Select all that apply) - <<<Answers>>>>When we
have traffic on a converged network, so there is something to
de-prioritize.
Whenever 100 Mbps Dante devices are on the network.
When ports begin to approach saturation, say around 60%-
80%.
When configuring IGMP Snooping, how many switches
should be IGMP Querier(s)? - <<<Answers>>>>One - there
can be only one
Suppose a switch has 8 queues on it. Which queue number
would typically have the highest priority? -
<<<Answers>>>>8
A network that carries multiple, possibly unrelated data types
(like internet, VoIP, Dante, etc.) is: - <<<Answers>>>>called
a converged network.
, DANTE LEVEL 2 TEST (ACTUAL 2025-2026)
QUESTIONS WITH 100% CORRECT ANSWERS
Suppose a Dante device has one channel and two transmit
flows. Can it connect to three different receiving devices? -
<<<Answers>>>>Yes. the channel must be set as multicast.
A unicast subscription is made between two Dante devices.
The latency value of the transmitter and receiver are 0.25msec
and 0.5msec, respectively.
What is the resulting latency of this stream? -
<<<Answers>>>>0.5msec
What protocol does Dante use for clocking? -
<<<Answers>>>>PTP
Can a Dante network with five switch hops support latency of
1msec? - <<<Answers>>>>Yes. Minimum recommended
latency could be as low as 0.5msec.
What advantages does unicast have over multicast
communication? (Select 3.) - <<<Answers>>>>Unicast is
simpler to deliver, reducing the strain on the switch.
Unicast can cross a router, Multicast cannot.
Unicast can achieve lower latency than Multicast. (Minimum
latency for multicast is 1msec.)
Which Dante software supports redundant connections? -
<<<Answers>>>>Dante Controller
QUESTIONS WITH 100% CORRECT ANSWERS
A broadcast network transmission: -
<<<Answers>>>>transmits from one to everyone on the
network
Quality of Service (QoS) allows some traffic to be prioritized
over others. When would be a good time to consider engaging
QoS? (Select all that apply) - <<<Answers>>>>When we
have traffic on a converged network, so there is something to
de-prioritize.
Whenever 100 Mbps Dante devices are on the network.
When ports begin to approach saturation, say around 60%-
80%.
When configuring IGMP Snooping, how many switches
should be IGMP Querier(s)? - <<<Answers>>>>One - there
can be only one
Suppose a switch has 8 queues on it. Which queue number
would typically have the highest priority? -
<<<Answers>>>>8
A network that carries multiple, possibly unrelated data types
(like internet, VoIP, Dante, etc.) is: - <<<Answers>>>>called
a converged network.
, DANTE LEVEL 2 TEST (ACTUAL 2025-2026)
QUESTIONS WITH 100% CORRECT ANSWERS
Suppose a Dante device has one channel and two transmit
flows. Can it connect to three different receiving devices? -
<<<Answers>>>>Yes. the channel must be set as multicast.
A unicast subscription is made between two Dante devices.
The latency value of the transmitter and receiver are 0.25msec
and 0.5msec, respectively.
What is the resulting latency of this stream? -
<<<Answers>>>>0.5msec
What protocol does Dante use for clocking? -
<<<Answers>>>>PTP
Can a Dante network with five switch hops support latency of
1msec? - <<<Answers>>>>Yes. Minimum recommended
latency could be as low as 0.5msec.
What advantages does unicast have over multicast
communication? (Select 3.) - <<<Answers>>>>Unicast is
simpler to deliver, reducing the strain on the switch.
Unicast can cross a router, Multicast cannot.
Unicast can achieve lower latency than Multicast. (Minimum
latency for multicast is 1msec.)
Which Dante software supports redundant connections? -
<<<Answers>>>>Dante Controller
