FSR STUDY GUIDE EXAM QUESTIONS &
ANSWERS 100% VERIFIED!
Constant compression is required on which sealant? - ANSWERSWater Cut-Off Mastic
What is the coverage rate of one tube of Water Cut-off Mastic? - ANSWERS10 linear
feet per tube with 7/16th bead
What is the maximum constant temperature Carlisle EPDM Products can come in
contact with? - ANSWERS180 F
What is the recommended storage temperature for all curable materials? -
ANSWERS60 to 80 degrees F
What product is water based? - ANSWERSAqua base 120 bonding adhesive
What is the coverage rate of Aqua Base 120 Bonding Adhesive - ANSWERS100-
120sqft per gallon finished surface
What is the shelf life of lap sealants? - ANSWERS12 months
What is the coverage rate of lap sealant? - ANSWERS5/16 bead - 22 linear feet per
tube
What is the purpose of 90-8-30A Bonding Adhesive? - ANSWERSBonding EPDM
membranes to various surfaces
What is the coverage rate of 90-8-30A Bonding Adhesive? - ANSWERS60sqft per
gallon finished surface
What is the shelf life of 90-8-30A Bonding Ahesive? - ANSWERS12 months
What is the shelf life of SecurTape? - ANSWERS12 months
Two part pourable sealer may be used for what? - ANSWERSFilling pourable sealer
pockets, Lightening rod attachment to EPDM Membrane, and B.U.R. Cold Tie-In
What is the shelf life of Two Part Pourable Sealer - ANSWERS12 months
What is the "Pot Life" of Two Part Pourable Sealer? - ANSWERS30 minutes
One Part Pourable Sealer may be used for what? - ANSWERSfilling pourable sealer
pockets
,What is the shelf life of HP 250 Primer - ANSWERS12 months
What is the coverage rate of HP 250 Primer - ANSWERS450sqft per gallon finished
surface kleen, 250sqft dusted
When is 6" SecurTape required? - ANSWERSWhere there is mechanical securement
within a splice
What is the shelf life of Sure-Seal Pressure Sensitive Inside / Outside Corners? -
ANSWERS9 months
What is the purpose of PS Pourable Sealer Pockets? - ANSWERSTo go around hard to
flash penetrations
What is the shelf life of Sure-Seal PS Pourable Sealer Pockets? - ANSWERS9 months
PS Pourable Sealer Pockets are available in what sizes? - ANSWERS4", 6", and 8"
What is the shelf life of Sure-White PS Uncured Flashing? - ANSWERS9 months
What is the shelf life of PS Cured Cover Strip? - ANSWERS12 months
What is PS Cured Cover Strip used for? - ANSWERSOverlayment of metal edging,
Strip in rows of membrane fastening plates, making repairs to EPDM membrane
What is the shelf life of PS Cured Curb Wrap? - ANSWERS12 months
What is 20-inch EPDM Pressure-Sensitive Cured Flashing used for? -
ANSWERSOverlay seam plates, flash curbs, and cuts in the membrane
What is the shelf life of PS Molded Pipe Seals? - ANSWERS12 months
Where is a PS Molded Pipe Seal cut for sizing over a pipe? - ANSWERSJust above a
rib
What product must be used when splicing with SecurTape? - ANSWERSEPDM Primer
What products can be used to form an outside corner? - ANSWERSPS uncured
elastoform or 7" x 9" PS Inside / Outside Corners
What is the coverage rate of Low VOC EPDM/TPO Primer? - ANSWERS700sqft per
gallon finished surface clean, 250sqft dusted
What is the shelf life of Low VOC EPDM/TPO Primer? - ANSWERS12 months
, How is 90-8-30A Bonding Adhesive checked for proper flash time? - ANSWERSTack
test. The adhesive will not string or stick to a dry finger touch
What is the shelf life of EPDM x-23 Low VOC Bonding Adhesive? - ANSWERS12
months
What is the coverage rate of Hydro-Bond PVC Water-based adhesive? -
ANSWERS100sqft per gallon finished surface
Which membranes can Hydro-bond adhesive be used with as a one-sided wet lay-in? -
ANSWERSSmoothback standard PVC membranes and fleeceback membranes
Which products must be applied prior to installing PVC Pressure Sensitive Cover strip?
- ANSWERSActivator and PVC Primer
What is the minimum temperature PVC PS coverstrip can be stored? - ANSWERS40
degrees F
What is the shelf life of PVC PS cover strip? - ANSWERS12 months
What must be done when PVC PS cover strip crossed over a joint in the metal edging,
membrane, or at an end lap? - ANSWERSUse a hot air gun to heat the top surface of
PVC cover strip and creases the material into the step-off
Which membranes are acceptable for use with Cav-Grip III/3v when used as a contact
adhesive in the field? - ANSWERSEPDM and TPO
Is PVC Step 1 activator required on metal surfaces? - ANSWERSNo
Which membranes are acceptable for use with Cav-Grip III/3v when used as a contact
adhesive on the walls? - ANSWERSEPDM, TPO and Fleeceback
What is the coverage rate of Cav-Grip III/3v 2-sided(field) in a 40# cylinder? -
ANSWERS1000sqft
What is the coverage rate of Cav-Grip III/3v 2-sided(walls) in a 40# cylinder? -
ANSWERS750sqft
What is the coverage rate of PVC Cav Grip in the field? Walls? - ANSWERS750sqft in
the field/400 walls
What is the lowest ambient temperature PVC Cav Grip can be installed in? -
ANSWERS35 degrees F
Which membranes are not acceptable with the new PVC Gav Grip - ANSWERSKEE
PVC, EPDM and TPO
ANSWERS 100% VERIFIED!
Constant compression is required on which sealant? - ANSWERSWater Cut-Off Mastic
What is the coverage rate of one tube of Water Cut-off Mastic? - ANSWERS10 linear
feet per tube with 7/16th bead
What is the maximum constant temperature Carlisle EPDM Products can come in
contact with? - ANSWERS180 F
What is the recommended storage temperature for all curable materials? -
ANSWERS60 to 80 degrees F
What product is water based? - ANSWERSAqua base 120 bonding adhesive
What is the coverage rate of Aqua Base 120 Bonding Adhesive - ANSWERS100-
120sqft per gallon finished surface
What is the shelf life of lap sealants? - ANSWERS12 months
What is the coverage rate of lap sealant? - ANSWERS5/16 bead - 22 linear feet per
tube
What is the purpose of 90-8-30A Bonding Adhesive? - ANSWERSBonding EPDM
membranes to various surfaces
What is the coverage rate of 90-8-30A Bonding Adhesive? - ANSWERS60sqft per
gallon finished surface
What is the shelf life of 90-8-30A Bonding Ahesive? - ANSWERS12 months
What is the shelf life of SecurTape? - ANSWERS12 months
Two part pourable sealer may be used for what? - ANSWERSFilling pourable sealer
pockets, Lightening rod attachment to EPDM Membrane, and B.U.R. Cold Tie-In
What is the shelf life of Two Part Pourable Sealer - ANSWERS12 months
What is the "Pot Life" of Two Part Pourable Sealer? - ANSWERS30 minutes
One Part Pourable Sealer may be used for what? - ANSWERSfilling pourable sealer
pockets
,What is the shelf life of HP 250 Primer - ANSWERS12 months
What is the coverage rate of HP 250 Primer - ANSWERS450sqft per gallon finished
surface kleen, 250sqft dusted
When is 6" SecurTape required? - ANSWERSWhere there is mechanical securement
within a splice
What is the shelf life of Sure-Seal Pressure Sensitive Inside / Outside Corners? -
ANSWERS9 months
What is the purpose of PS Pourable Sealer Pockets? - ANSWERSTo go around hard to
flash penetrations
What is the shelf life of Sure-Seal PS Pourable Sealer Pockets? - ANSWERS9 months
PS Pourable Sealer Pockets are available in what sizes? - ANSWERS4", 6", and 8"
What is the shelf life of Sure-White PS Uncured Flashing? - ANSWERS9 months
What is the shelf life of PS Cured Cover Strip? - ANSWERS12 months
What is PS Cured Cover Strip used for? - ANSWERSOverlayment of metal edging,
Strip in rows of membrane fastening plates, making repairs to EPDM membrane
What is the shelf life of PS Cured Curb Wrap? - ANSWERS12 months
What is 20-inch EPDM Pressure-Sensitive Cured Flashing used for? -
ANSWERSOverlay seam plates, flash curbs, and cuts in the membrane
What is the shelf life of PS Molded Pipe Seals? - ANSWERS12 months
Where is a PS Molded Pipe Seal cut for sizing over a pipe? - ANSWERSJust above a
rib
What product must be used when splicing with SecurTape? - ANSWERSEPDM Primer
What products can be used to form an outside corner? - ANSWERSPS uncured
elastoform or 7" x 9" PS Inside / Outside Corners
What is the coverage rate of Low VOC EPDM/TPO Primer? - ANSWERS700sqft per
gallon finished surface clean, 250sqft dusted
What is the shelf life of Low VOC EPDM/TPO Primer? - ANSWERS12 months
, How is 90-8-30A Bonding Adhesive checked for proper flash time? - ANSWERSTack
test. The adhesive will not string or stick to a dry finger touch
What is the shelf life of EPDM x-23 Low VOC Bonding Adhesive? - ANSWERS12
months
What is the coverage rate of Hydro-Bond PVC Water-based adhesive? -
ANSWERS100sqft per gallon finished surface
Which membranes can Hydro-bond adhesive be used with as a one-sided wet lay-in? -
ANSWERSSmoothback standard PVC membranes and fleeceback membranes
Which products must be applied prior to installing PVC Pressure Sensitive Cover strip?
- ANSWERSActivator and PVC Primer
What is the minimum temperature PVC PS coverstrip can be stored? - ANSWERS40
degrees F
What is the shelf life of PVC PS cover strip? - ANSWERS12 months
What must be done when PVC PS cover strip crossed over a joint in the metal edging,
membrane, or at an end lap? - ANSWERSUse a hot air gun to heat the top surface of
PVC cover strip and creases the material into the step-off
Which membranes are acceptable for use with Cav-Grip III/3v when used as a contact
adhesive in the field? - ANSWERSEPDM and TPO
Is PVC Step 1 activator required on metal surfaces? - ANSWERSNo
Which membranes are acceptable for use with Cav-Grip III/3v when used as a contact
adhesive on the walls? - ANSWERSEPDM, TPO and Fleeceback
What is the coverage rate of Cav-Grip III/3v 2-sided(field) in a 40# cylinder? -
ANSWERS1000sqft
What is the coverage rate of Cav-Grip III/3v 2-sided(walls) in a 40# cylinder? -
ANSWERS750sqft
What is the coverage rate of PVC Cav Grip in the field? Walls? - ANSWERS750sqft in
the field/400 walls
What is the lowest ambient temperature PVC Cav Grip can be installed in? -
ANSWERS35 degrees F
Which membranes are not acceptable with the new PVC Gav Grip - ANSWERSKEE
PVC, EPDM and TPO
