and Answers 100% Solved | Rated A+
The air-handling equipment placed in a commercial building
would be considered part of the ___. - ✔✔dead load.
Studs and joists are commonly installed at 16" __. - ✔✔on center
Before installing hardwood flooring, ___ would most likely be
installed over the subfloor. - ✔✔underlayment
Masonry ___ may be used to support other structural members
such as girders and beams. - ✔✔piers
A joist can be secured to the structure using a ____. - ✔✔joist
hanger.
The distance between structural supports of a floor system is
known as the _____. - ✔✔span
The ____ is created with the header joists and end joists. - ✔✔rim
joist
1
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
, ____ lumber should be used for construction lumber. -
✔✔Seasoned
In balloon framing, the studs must be blocked with approved
____. - ✔✔fire stops
Lumber in a floor system must be installed with the ___ up. -
✔✔crown
In platform construction, the ends of the common joists are
attached to a _____ to form the band joist assembly. - ✔✔header
joist
A ____ can be applied over a joint to strenthen it. - ✔✔scab
A metal or fiberglass ___ is used to create a one-way joist
system. - ✔✔long pan
Notches in studs or joists are used to support another piece are
known as a ____ - ✔✔let-ins
2
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.