Basic Welding Level 1 Module 6 Exam
Questions and Answers 100% Solved
the demonstration that welds made following a specific procedure
can meet prescribed standards - ✔✔welding procedure
qualification
a discontinuity or imperfection that renders a part of the product or
the entire product unable to meet minimum acceptable standards
or specifications - ✔✔defect
the type of discontinuity that is identified by cracking in the base
metal near the weld, but under the surface - ✔✔underbead
cracking
metals that have the ability to be made harder by heating and
then cooling - ✔✔hardenable materials
1
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
, the document containing the results of the nondestructive and
destructive testing required to qualify a welding procedure
specification - ✔✔procedure qualification record
a change or break in the shape or structure of a part that may or
may not be considered a defect, depending on the code -
✔✔discontinuity
the quality or state of having a uniform structure or composition
throughout - ✔✔homogeneity
the testing method is which images are made by passing x-rays
or gamma rays through an object and recording the variations in
density on photographic film - ✔✔radiographic
cracks in the base metal formed when layers separate -
✔✔laminations
metal has been made brittle and will tend to crack with little
bending - ✔✔embrittled
foreign matter introduced into and remaining in a weld -
✔✔inclusion
2
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
Questions and Answers 100% Solved
the demonstration that welds made following a specific procedure
can meet prescribed standards - ✔✔welding procedure
qualification
a discontinuity or imperfection that renders a part of the product or
the entire product unable to meet minimum acceptable standards
or specifications - ✔✔defect
the type of discontinuity that is identified by cracking in the base
metal near the weld, but under the surface - ✔✔underbead
cracking
metals that have the ability to be made harder by heating and
then cooling - ✔✔hardenable materials
1
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
, the document containing the results of the nondestructive and
destructive testing required to qualify a welding procedure
specification - ✔✔procedure qualification record
a change or break in the shape or structure of a part that may or
may not be considered a defect, depending on the code -
✔✔discontinuity
the quality or state of having a uniform structure or composition
throughout - ✔✔homogeneity
the testing method is which images are made by passing x-rays
or gamma rays through an object and recording the variations in
density on photographic film - ✔✔radiographic
cracks in the base metal formed when layers separate -
✔✔laminations
metal has been made brittle and will tend to crack with little
bending - ✔✔embrittled
foreign matter introduced into and remaining in a weld -
✔✔inclusion
2
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
