System Startup and Shutdown Module 6 Questions and Answers | Latest Version | 2024/2025 | Correct & Verified

System Startup and Shutdown Module 6 Questions and Answers | Latest Version | 2024/2025 | Correct & Verified What is the first step in the system startup process? The first step is to verify that all system components are correctly installed and configured. Why is it important to check the manufacturer’s manual before starting a system? The manual provides critical information on proper startup procedures, safety guidelines, and troubleshooting tips specific to the system. What should you inspect before starting a pump system? Check for proper lubrication, fluid levels, and that all connections are secure to prevent damage during operation. How do you confirm that all safety devices are functional before starting a system? Test all safety devices such as emergency stop buttons, alarms, and shutoff valves to ensure they will activate in case of an issue. 2 Why is it necessary to perform a pre-startup inspection? A pre-startup inspection identifies potential issues that could cause system failure or hazards, ensuring safe and reliable operation. What is the role of a system controller during startup? The system controller manages the sequence of operations, ensuring each component is activated in the correct order. What should you do if a system doesn’t start after following all procedures? Troubleshoot the system by checking for common issues such as power supply problems, control faults, or sensor malfunctions. What is the purpose of monitoring system parameters during startup? Monitoring parameters such as pressure, temperature, and flow ensures that the system is operating within safe and optimal conditions. How does slow startup benefit some systems? Slow startup reduces stress on components, preventing sudden spikes in pressure or power that could damage the system. 3 What’s the importance of checking for leaks during startup? Leaks can indicate poor seals or loose fittings, which may lead to operational failure or safety risks if not addressed. What action should be taken if abnormal vibrations are detected during startup? Abnormal vibrations could signal alignment issues or mechanical failure, requiring immediate shutdown to prevent further damage. What role does system pressure play in startup procedures? Proper pressure ensures that components such as pumps and valves are operating efficiently and safely, avoiding damage or performance issues.