SACA Certification C-101 Latest Update 2024-2025 Actual
Exam 150 Questions and 100%
Functionn - Correct answer-The three Fs of product design are form, fit and __________.
Lean Manufacturing - Correct answer-High product quality, quick delivery, low costs are the primary
goals of what system?
Standardize - Correct answer-Which 5S step involves formatting 5S work instructions so that they look
and read alike?
Reduces the waste of excess motion, helps improve morale, and enables other lean methods to be more
successful - Correct answer-How does the 5S method aid in the goal of lean manufacturing?
HMI - Correct answer-What is the interface used with CNC machines to load and monitor programs?
PLC - Correct answer-The automation of many different manufacturing processes is done through the
use of a small computer called a __________.
An error message. - Correct answer-When a machine stops due to an problem, what would the
machine's HMI typically display?
,Industry 4.0 - Correct answer-Smart sensors connected to manufacturing networks creates what level of
Industry?
If a wire has continuity it ___________ . - Correct answer-Has a complete path for current to flow
If a circuit has a total resistance of 25 ohms, current of 3 amps, and a supply voltage of 75V, what is the
amount of power used? - Correct answer-225 W
The difference between a fuse and a circuit breaker is __________. - Correct answer-Circuit breakers
can be reset and used again
What type of circuit breaker is used when changes in current occur quickly? - Correct answer-Magnetic
What will be the conditions of the lights and 1SOL if 1PB is NOT pressed and 1SS is in the left-hand
position - Correct answer-Red light off, green light on. Solenoid de-energized
Which of these components is used to turn the motor off after the pushbutton (PB1) is momentarily
activated - Correct answer-PB2
Servo Robots use Pmove or point move to program the robots movements. The points are most often
recorded using a __________. - Correct answer-Teach Pendant
What are the 3 main components of an industrial robot in the picture. - Correct answer-Manipulator,
Controller, Teach pendant
When creating a program there are two files. The robot will follow a sequence of steps saved in the
__________ file. The places the robot will travel to is saved in the ___________ file. - Correct answer-
Program, Points
The __________ transistor provides a high signal at its output when the sensor is energized, or has
detected the presence of an object. - Correct answer-PNP
, ____________ targets are the only targets that can be detected by an inductive proximity sensor. -
Correct answer-Metallic
A capacitive sensor used the principle of __________ to sense the presence of an object - Correct
answer-Capacitance
Ethernet - Correct answer-What standard introduced in the early 1980s established a method to
physically connect machines from different manufacturers enabling them to communicate to one
another?
Predictive maintenance - Correct answer-Which IIoT application monitors equipment during normal
operation to prevent failures to the equipment?
Standards - Correct answer-Occupational Safety and Health Administration(OSHA) develops __________
for safety retail and service industries to construction and manufacturing.
True - Correct answer-The regulation that requires manufacturers to document and report information
on the types of chemicals they use, store, release into the environment, or dispose of is known as
EPCRA. Is this statement TRUE or FALSE?
Computers - Correct answer-The use of ___________________marked the advent of the third industrial
revolution?
Notify a supervisor immediately - Correct answer-If an operator knows a safety problem exists with a
machine, the operator should __________.
Emergency stop - Correct answer-A(n) __________ is a device or system that shuts down a machine
immediately if the operator is in danger.
Exam 150 Questions and 100%
Functionn - Correct answer-The three Fs of product design are form, fit and __________.
Lean Manufacturing - Correct answer-High product quality, quick delivery, low costs are the primary
goals of what system?
Standardize - Correct answer-Which 5S step involves formatting 5S work instructions so that they look
and read alike?
Reduces the waste of excess motion, helps improve morale, and enables other lean methods to be more
successful - Correct answer-How does the 5S method aid in the goal of lean manufacturing?
HMI - Correct answer-What is the interface used with CNC machines to load and monitor programs?
PLC - Correct answer-The automation of many different manufacturing processes is done through the
use of a small computer called a __________.
An error message. - Correct answer-When a machine stops due to an problem, what would the
machine's HMI typically display?
,Industry 4.0 - Correct answer-Smart sensors connected to manufacturing networks creates what level of
Industry?
If a wire has continuity it ___________ . - Correct answer-Has a complete path for current to flow
If a circuit has a total resistance of 25 ohms, current of 3 amps, and a supply voltage of 75V, what is the
amount of power used? - Correct answer-225 W
The difference between a fuse and a circuit breaker is __________. - Correct answer-Circuit breakers
can be reset and used again
What type of circuit breaker is used when changes in current occur quickly? - Correct answer-Magnetic
What will be the conditions of the lights and 1SOL if 1PB is NOT pressed and 1SS is in the left-hand
position - Correct answer-Red light off, green light on. Solenoid de-energized
Which of these components is used to turn the motor off after the pushbutton (PB1) is momentarily
activated - Correct answer-PB2
Servo Robots use Pmove or point move to program the robots movements. The points are most often
recorded using a __________. - Correct answer-Teach Pendant
What are the 3 main components of an industrial robot in the picture. - Correct answer-Manipulator,
Controller, Teach pendant
When creating a program there are two files. The robot will follow a sequence of steps saved in the
__________ file. The places the robot will travel to is saved in the ___________ file. - Correct answer-
Program, Points
The __________ transistor provides a high signal at its output when the sensor is energized, or has
detected the presence of an object. - Correct answer-PNP
, ____________ targets are the only targets that can be detected by an inductive proximity sensor. -
Correct answer-Metallic
A capacitive sensor used the principle of __________ to sense the presence of an object - Correct
answer-Capacitance
Ethernet - Correct answer-What standard introduced in the early 1980s established a method to
physically connect machines from different manufacturers enabling them to communicate to one
another?
Predictive maintenance - Correct answer-Which IIoT application monitors equipment during normal
operation to prevent failures to the equipment?
Standards - Correct answer-Occupational Safety and Health Administration(OSHA) develops __________
for safety retail and service industries to construction and manufacturing.
True - Correct answer-The regulation that requires manufacturers to document and report information
on the types of chemicals they use, store, release into the environment, or dispose of is known as
EPCRA. Is this statement TRUE or FALSE?
Computers - Correct answer-The use of ___________________marked the advent of the third industrial
revolution?
Notify a supervisor immediately - Correct answer-If an operator knows a safety problem exists with a
machine, the operator should __________.
Emergency stop - Correct answer-A(n) __________ is a device or system that shuts down a machine
immediately if the operator is in danger.
