1|Page
BASIC WELDING LEVEL 1 MODULE 6
QUESTIONS AND ANSWERS 100% PASS
the demonstration that welds made following a specific procedure can meet prescribed standards -
✔✔welding procedure qualification
a discontinuity or imperfection that renders a part of the product or the entire product unable to meet
minimum acceptable standards or specifications - ✔✔defect
the type of discontinuity that is identified by cracking in the base metal near the weld, but under the
surface - ✔✔underbead cracking
metals that have the ability to be made harder by heating and then cooling - ✔✔hardenable materials
the document containing the results of the nondestructive and destructive testing required to qualify a
welding procedure specification - ✔✔procedure qualification record
a change or break in the shape or structure of a part that may or may not be considered a defect,
depending on the code - ✔✔discontinuity
the quality or state of having a uniform structure or composition throughout - ✔✔homogeneity
the testing method is which images are made by passing x-rays or gamma rays through an object and
recording the variations in density on photographic film - ✔✔radiographic
cracks in the base metal formed when layers separate - ✔✔laminations
metal has been made brittle and will tend to crack with little bending - ✔✔embrittled
foreign matter introduced into and remaining in a weld - ✔✔inclusion
Created by Katelyn Whitman © 2025, All Rights Reserved.
BASIC WELDING LEVEL 1 MODULE 6
QUESTIONS AND ANSWERS 100% PASS
the demonstration that welds made following a specific procedure can meet prescribed standards -
✔✔welding procedure qualification
a discontinuity or imperfection that renders a part of the product or the entire product unable to meet
minimum acceptable standards or specifications - ✔✔defect
the type of discontinuity that is identified by cracking in the base metal near the weld, but under the
surface - ✔✔underbead cracking
metals that have the ability to be made harder by heating and then cooling - ✔✔hardenable materials
the document containing the results of the nondestructive and destructive testing required to qualify a
welding procedure specification - ✔✔procedure qualification record
a change or break in the shape or structure of a part that may or may not be considered a defect,
depending on the code - ✔✔discontinuity
the quality or state of having a uniform structure or composition throughout - ✔✔homogeneity
the testing method is which images are made by passing x-rays or gamma rays through an object and
recording the variations in density on photographic film - ✔✔radiographic
cracks in the base metal formed when layers separate - ✔✔laminations
metal has been made brittle and will tend to crack with little bending - ✔✔embrittled
foreign matter introduced into and remaining in a weld - ✔✔inclusion
Created by Katelyn Whitman © 2025, All Rights Reserved.
