CPSI PRACTICE EXAM 2024
ANSWER ALL QUESTIONS IN THIS SECTION
QUESTION 1
What is a Priority 1 Hazard? - ANSWERS-A readily accessible hazard that would
cause an accident which would result in:
-Death
-Brain Damage
-Permanent paralysis
-Loss of vision
-Loss of limb
-Loss of speech
-Organ Destruction
QUESTION 2
Consideration must be given to the __________________________, Probability,
and Consequences - ANSWERS-Possibility
END OF
PAGE 1
, CPSI PRACTICE EXAM 2024
QUESTION 3
A type of equipment that is not addressed in a standard is referred to as
___________________________________? - ANSWERS-Non-traditional
equipment
QUESTION 4
The designer or manufacturer, or both, shall use
_____________________________________
_____________________________________ to perform and document a hazard
analysis and follow appropriate requirements to mitigate the hazards? -
ANSWERS-professional judgment
QUESTION 5
Trolley or Track Ride Platforms Maximum height - ______________________ for
users aged 5-12? - ANSWERS-36" or 910 mm
QUESTION 6
Upper Body Trolley Ride Use Zone: a clear area, free of equipment, shall surround
the trolley path ________? - ANSWERS-72"
END OF
PAGE 2
, CPSI PRACTICE EXAM 2024
QUESTION 7
Seated Only Trolley Ridge Clearance Zones: the center to center distance between
adjacent paths for seated trolley rides are a min.
________________________________? - ANSWERS-80" or 2032 mm
QUESTION 8
Which of the following information signs or labels are required for every
playground?
A) Warning about installing play equipment over hard surfaces
B) Identity of playground owner/operator
C) Age appropriateness
D) Supervision Required
a. C and D only
b. B and C only
c. A and C only
d. A and B only - ANSWERS-c. A and C only
END OF
PAGE 3
, CPSI PRACTICE EXAM 2024
QUESTION 9
What is the clearance zone minimum requirement from any support structure
throughout the path of travel for a Sitting Trolley Ride?
A) 20" or 508 mm
B) 30" or 762 mm
C) 48" or 1219 mm
D) 60" or 1524 mm - ANSWERS-B) 30" or 762 mm
QUESTION 10
What would the minimum fall height be for a suspended sitting trolley ride?
A) 48" or 1,219 mm
B) 64" or 1,625 mm
C) 76" or 1,930 mm
D) 84" or 2,134 mm - ANSWERS-C) 76" or 1,930 mm
QUESTION 11
F2223 helps with _____________________? - ANSWERS-surfacing
END OF
PAGE 4
ANSWER ALL QUESTIONS IN THIS SECTION
QUESTION 1
What is a Priority 1 Hazard? - ANSWERS-A readily accessible hazard that would
cause an accident which would result in:
-Death
-Brain Damage
-Permanent paralysis
-Loss of vision
-Loss of limb
-Loss of speech
-Organ Destruction
QUESTION 2
Consideration must be given to the __________________________, Probability,
and Consequences - ANSWERS-Possibility
END OF
PAGE 1
, CPSI PRACTICE EXAM 2024
QUESTION 3
A type of equipment that is not addressed in a standard is referred to as
___________________________________? - ANSWERS-Non-traditional
equipment
QUESTION 4
The designer or manufacturer, or both, shall use
_____________________________________
_____________________________________ to perform and document a hazard
analysis and follow appropriate requirements to mitigate the hazards? -
ANSWERS-professional judgment
QUESTION 5
Trolley or Track Ride Platforms Maximum height - ______________________ for
users aged 5-12? - ANSWERS-36" or 910 mm
QUESTION 6
Upper Body Trolley Ride Use Zone: a clear area, free of equipment, shall surround
the trolley path ________? - ANSWERS-72"
END OF
PAGE 2
, CPSI PRACTICE EXAM 2024
QUESTION 7
Seated Only Trolley Ridge Clearance Zones: the center to center distance between
adjacent paths for seated trolley rides are a min.
________________________________? - ANSWERS-80" or 2032 mm
QUESTION 8
Which of the following information signs or labels are required for every
playground?
A) Warning about installing play equipment over hard surfaces
B) Identity of playground owner/operator
C) Age appropriateness
D) Supervision Required
a. C and D only
b. B and C only
c. A and C only
d. A and B only - ANSWERS-c. A and C only
END OF
PAGE 3
, CPSI PRACTICE EXAM 2024
QUESTION 9
What is the clearance zone minimum requirement from any support structure
throughout the path of travel for a Sitting Trolley Ride?
A) 20" or 508 mm
B) 30" or 762 mm
C) 48" or 1219 mm
D) 60" or 1524 mm - ANSWERS-B) 30" or 762 mm
QUESTION 10
What would the minimum fall height be for a suspended sitting trolley ride?
A) 48" or 1,219 mm
B) 64" or 1,625 mm
C) 76" or 1,930 mm
D) 84" or 2,134 mm - ANSWERS-C) 76" or 1,930 mm
QUESTION 11
F2223 helps with _____________________? - ANSWERS-surfacing
END OF
PAGE 4
