Industrial engineering || Already Passed.
For the best muscle endurance, the exertion level should be less than______ percent. correct
answers 15%
The Institute of Industrial Engineers wasw founded in correct answers 1948
Which is not a part of the Methods engineering procedure to develop a work center? correct
answers
Motion study is the study of body motions used in performing an operation, with the thought of
improving the operation by eliminating unnecessary motions and simplifying necessary motions,
and then establishing the most favorable motion sequence. correct answers true
There are __________ steps in applying methods engineering. correct answers 8 Search Results
Featured snippet from the web
List the eight steps in applying methods engineering. The eight steps of methods engineering are:
1) select the project, 2) get and present the data, 3) analyze the data, 4) develop the ideal method,
5) present and install the method, 6) develop a job analysis, 7) establish time standards, 8) follow
up the method
The fundamental tools that result in increased productivity include all but _________. correct
answers sampling methods
Work design is an important element of methods study because if the methods changes are
inefficient or even injurious to the operators, any productivity improvements will be negated by
increased medical and safety costs. correct answers true
CTD's is an acronym for "cumulative trauma disorders" correct answers True
Safety was one of the principles of scientific management by Frederick W. Taylor. correct
answers false
Frederick Taylor is considered the father of correct answers Work measurement - establish a
standard time/scientific management
The technological disasters at Three-Mile Island and Bhopal, India as wells as the increase in
product liability and personal injury cases have contributed to a need for ergonomics. correct
answers True
What organization is concerned with advancing the ideas of Taylor and the Gilbreths? correct
answers all the above
What is the principle objective of methods engineering? correct answers The principle objective
of methods engineering is to improve productivity and decrease the unit cost of output while
maintaining the health and safety of the worker.
, Ch2 correct answers
the 5s pillars correct answers sort, sustain, shine, set in order, standardize
product does not require tolerance correct answers false
operation analysis correct answers true
elements can be reduced correct answers flow process chart analysis
simplicity in product design correct answers true
the xyz correct answers tightening tolerances
quality control always justified correct answers false
false correct answers
Frederick Taylor is considered the father of correct answers scientific management
Improper planning when the job is first set up, improper performance of the previous job or a
succeeding job, and attempts to give a product more sales appeal are all necessary operations to
develop an industry. correct answers true
The technological disasters at Three-Mile Island and Bhopal, India as wells as the increase in
product liability and personal injury cases have contributed to a need for ergonomics. correct
answers true
What is the principle objective of methods engineering? correct answers
Start Ch 3 correct answers
5S is not a tool for Lean manufacturing but rather a tool used in Six Sigma. correct answers false
What organization is concerned with advancing the ideas of Taylor and the Gilbreths? correct
answers all the above
Lot by lot inspection is a sampling procedure in which every item in the lot is inspected to ensure
specifications are met in that lot. correct answers False
Quality control procedures are always justified. correct answers False
Once the first three pillars of the 5S program have been implemented, sustain serves to maintain
the order and consistent approach to housekeeping and the methods. correct answers False
For the best muscle endurance, the exertion level should be less than______ percent. correct
answers 15%
The Institute of Industrial Engineers wasw founded in correct answers 1948
Which is not a part of the Methods engineering procedure to develop a work center? correct
answers
Motion study is the study of body motions used in performing an operation, with the thought of
improving the operation by eliminating unnecessary motions and simplifying necessary motions,
and then establishing the most favorable motion sequence. correct answers true
There are __________ steps in applying methods engineering. correct answers 8 Search Results
Featured snippet from the web
List the eight steps in applying methods engineering. The eight steps of methods engineering are:
1) select the project, 2) get and present the data, 3) analyze the data, 4) develop the ideal method,
5) present and install the method, 6) develop a job analysis, 7) establish time standards, 8) follow
up the method
The fundamental tools that result in increased productivity include all but _________. correct
answers sampling methods
Work design is an important element of methods study because if the methods changes are
inefficient or even injurious to the operators, any productivity improvements will be negated by
increased medical and safety costs. correct answers true
CTD's is an acronym for "cumulative trauma disorders" correct answers True
Safety was one of the principles of scientific management by Frederick W. Taylor. correct
answers false
Frederick Taylor is considered the father of correct answers Work measurement - establish a
standard time/scientific management
The technological disasters at Three-Mile Island and Bhopal, India as wells as the increase in
product liability and personal injury cases have contributed to a need for ergonomics. correct
answers True
What organization is concerned with advancing the ideas of Taylor and the Gilbreths? correct
answers all the above
What is the principle objective of methods engineering? correct answers The principle objective
of methods engineering is to improve productivity and decrease the unit cost of output while
maintaining the health and safety of the worker.
, Ch2 correct answers
the 5s pillars correct answers sort, sustain, shine, set in order, standardize
product does not require tolerance correct answers false
operation analysis correct answers true
elements can be reduced correct answers flow process chart analysis
simplicity in product design correct answers true
the xyz correct answers tightening tolerances
quality control always justified correct answers false
false correct answers
Frederick Taylor is considered the father of correct answers scientific management
Improper planning when the job is first set up, improper performance of the previous job or a
succeeding job, and attempts to give a product more sales appeal are all necessary operations to
develop an industry. correct answers true
The technological disasters at Three-Mile Island and Bhopal, India as wells as the increase in
product liability and personal injury cases have contributed to a need for ergonomics. correct
answers true
What is the principle objective of methods engineering? correct answers
Start Ch 3 correct answers
5S is not a tool for Lean manufacturing but rather a tool used in Six Sigma. correct answers false
What organization is concerned with advancing the ideas of Taylor and the Gilbreths? correct
answers all the above
Lot by lot inspection is a sampling procedure in which every item in the lot is inspected to ensure
specifications are met in that lot. correct answers False
Quality control procedures are always justified. correct answers False
Once the first three pillars of the 5S program have been implemented, sustain serves to maintain
the order and consistent approach to housekeeping and the methods. correct answers False
