OSHA Basic Orientation Plus Test | Updated 2023 -
2024 | Questions with correct verified answers |
Rated A+
What is the most frequently cited OSHA violation? - ANSWER Fall Protection
What key elements are essential to recognizing hazards and reducing or eliminating workplace hazards? -
ANSWER Management commitment and employee involvement
You are encouraged to ask your coworkers/supervisor for information whenever you have a problem or
are in doubt about what to do on a job? - ANSWER True
It is your responsibility to follow all safety regulations, inform your employer of any unsafe condition;
report all injuries no matter how minor they seem and wear the proper personal protective equipment?
- ANSWER True
The OSHA standard that addresses the requirements for preventing and lessening the results of a bad
release of toxic, reactive, flammable, or highly explosive hazardous chemicals from a process - ANSWER
Process safety management Standard
The process Hazard Analysis (PHA) is one of the most important parts of the PSM program. PHAs are
used to identify and evaluate major processes and ensure they are - ANSWER Evaluated, Controlled, and
Identified
In the PSM standard OSHA states employees must be trained if they work with highly hazardous
chemicals. - ANSWER True
Facilities are not permitted to control your entrance and exit in covered process areas. - ANSWER False
What should be your first concern from the moment you enter the work site? - ANSWER Safety
, Under the Stop Work Authority, you have the right and obligation to stop a work activity if you have
reason to believe your own safety or a coworkers safety is in jeopardy or if the work plan is not clearly
established or understood . - ANSWER True
What's needed in order to operate a plant-owned vehicle or mobile equipment while at a facility -
ANSWER qualified only authorized only
What type of work permits you may encounter on the job - ANSWER safe work permits confined space
entry permits, hot work permits, line entry or line breaking permits, lockout/tagout permits
if you are replacing a piece of equipment the new one should be the same as the one being removed. If
its not you should find out whether the change was on purpose. what is this called - ANSWER
Management of change
Used only where an immediate life threatening hazard exists - ANSWER Danger
Used where immediate non life threatening hazards exist - ANSWER Warning Sign
Used to warn against potential hazards or to caution against unsafe practices - ANSWER Caution signs
Physical devices that are designed to prevent entry into an area where hazards are present. - ANSWER
Barriers
Obstacles that discourage the passage of persons or vehicles - ANSWER Barricade
When lifting or setting down a load, bend at the - ANSWER Knees
If you experience pain or discomfort as a result of your work activities, you should do what? - ANSWER
report it to your supervisor as soon as possible
2024 | Questions with correct verified answers |
Rated A+
What is the most frequently cited OSHA violation? - ANSWER Fall Protection
What key elements are essential to recognizing hazards and reducing or eliminating workplace hazards? -
ANSWER Management commitment and employee involvement
You are encouraged to ask your coworkers/supervisor for information whenever you have a problem or
are in doubt about what to do on a job? - ANSWER True
It is your responsibility to follow all safety regulations, inform your employer of any unsafe condition;
report all injuries no matter how minor they seem and wear the proper personal protective equipment?
- ANSWER True
The OSHA standard that addresses the requirements for preventing and lessening the results of a bad
release of toxic, reactive, flammable, or highly explosive hazardous chemicals from a process - ANSWER
Process safety management Standard
The process Hazard Analysis (PHA) is one of the most important parts of the PSM program. PHAs are
used to identify and evaluate major processes and ensure they are - ANSWER Evaluated, Controlled, and
Identified
In the PSM standard OSHA states employees must be trained if they work with highly hazardous
chemicals. - ANSWER True
Facilities are not permitted to control your entrance and exit in covered process areas. - ANSWER False
What should be your first concern from the moment you enter the work site? - ANSWER Safety
, Under the Stop Work Authority, you have the right and obligation to stop a work activity if you have
reason to believe your own safety or a coworkers safety is in jeopardy or if the work plan is not clearly
established or understood . - ANSWER True
What's needed in order to operate a plant-owned vehicle or mobile equipment while at a facility -
ANSWER qualified only authorized only
What type of work permits you may encounter on the job - ANSWER safe work permits confined space
entry permits, hot work permits, line entry or line breaking permits, lockout/tagout permits
if you are replacing a piece of equipment the new one should be the same as the one being removed. If
its not you should find out whether the change was on purpose. what is this called - ANSWER
Management of change
Used only where an immediate life threatening hazard exists - ANSWER Danger
Used where immediate non life threatening hazards exist - ANSWER Warning Sign
Used to warn against potential hazards or to caution against unsafe practices - ANSWER Caution signs
Physical devices that are designed to prevent entry into an area where hazards are present. - ANSWER
Barriers
Obstacles that discourage the passage of persons or vehicles - ANSWER Barricade
When lifting or setting down a load, bend at the - ANSWER Knees
If you experience pain or discomfort as a result of your work activities, you should do what? - ANSWER
report it to your supervisor as soon as possible
