ipc j-std-001G UPDATED ACTUAL Exam
Questions and CORRECT Answers
Conductor Diameter - CORRECT ANSWER - The conductor diameter is the outside
diameter of wire, either stranded or solid, without the insulation
Wire Diameter - CORRECT ANSWER - he wire diameter is the outside diameter of wire,
either stranded or solid, including insulation if present
Disposition - CORRECT ANSWER - The determination of how defects should be treated.
Dispositions include, but are not limited to, rework, use as is, scrap or repair.
Electrical Clearance - CORRECT ANSWER - The minimum spacing between
noncommon uninsulated conductors, e.g., patterns, materials, hardware, residue, is referre<;l to
as "minimum electrical clearance" throughout this document and is defined in the applicable
design standard or on the approved or controlled documentation. In the absence of a known
design standard use Appendix B (derived from IPC-2221).
FOD (Foreign Object Debris) - CORRECT ANSWER - A generic term for a substance,
debris, particulate matter or article alien to the assembly or system.
High Volatage - CORRECT ANSWER - The term "high voltage" will vary by design and
application. The high voltage criteria in this document are only applicable when specifically
required in the drawings/procurement documentation.
Manufacturer (Assembler) - CORRECT ANSWER - The individual, organization, or
company responsible for the assembly process and verification operations necessary to ensure
full compliance of assemblies to this Standard.
Objective Evidence - CORRECT ANSWER - Documentation in the form of hard copy,
computer data, video, or other media that demonstrates the requirements in the Standard have
been met (for examples, see Appendix C).
Questions and CORRECT Answers
Conductor Diameter - CORRECT ANSWER - The conductor diameter is the outside
diameter of wire, either stranded or solid, without the insulation
Wire Diameter - CORRECT ANSWER - he wire diameter is the outside diameter of wire,
either stranded or solid, including insulation if present
Disposition - CORRECT ANSWER - The determination of how defects should be treated.
Dispositions include, but are not limited to, rework, use as is, scrap or repair.
Electrical Clearance - CORRECT ANSWER - The minimum spacing between
noncommon uninsulated conductors, e.g., patterns, materials, hardware, residue, is referre<;l to
as "minimum electrical clearance" throughout this document and is defined in the applicable
design standard or on the approved or controlled documentation. In the absence of a known
design standard use Appendix B (derived from IPC-2221).
FOD (Foreign Object Debris) - CORRECT ANSWER - A generic term for a substance,
debris, particulate matter or article alien to the assembly or system.
High Volatage - CORRECT ANSWER - The term "high voltage" will vary by design and
application. The high voltage criteria in this document are only applicable when specifically
required in the drawings/procurement documentation.
Manufacturer (Assembler) - CORRECT ANSWER - The individual, organization, or
company responsible for the assembly process and verification operations necessary to ensure
full compliance of assemblies to this Standard.
Objective Evidence - CORRECT ANSWER - Documentation in the form of hard copy,
computer data, video, or other media that demonstrates the requirements in the Standard have
been met (for examples, see Appendix C).
