QUESTIONS AND DETAILED ANSWERS
GRADED A+ |100% VERIFIED |2024
UPDATE |LATEST UPDATE!!!
MCD - correct answer > All CRJs: verify pins aren't protruding
ERJ:
1. Lining cover is present.
2. Lock/vent flap lever (labeled "vent flap") is up
3. Escape slide lever (labeled "arming lever") is up
4. Escape slide indicator is disarmed.
5. Girt bar indicator is clear.
6. Lock indicators are clear.
7. Escape slide pressure gauge needle is in the green zone.
8. Caution strap is stowed
APU Serv Bus - correct answer > CRJ 200 Only (FA Panel): verify
APU service button is off
,Cabin and entry lights - correct answer > All CRJs (FA panel):
verify lights are operational and test BRT, DIM, and OFF settings
for each (ceiling, sidewall, galley, dome, and boarding)
ERJ (FWD FA Panel):
Test BRT, DIM, and OFF for ceiling, sidewall, FWD entrance, and
FWD Galley Area
LAV Smoke Detectors (FWD and AFT) - correct answer > ERJ
(FWD FA Panel):
1. Ensure lavatory is empty
2. Press FWD LAVATORY SMOKE TEST button
3. Listen for aural alarm from FWD lavatory
4. Look for orange flashing light on FA indicator panel closest to
lavatory
5. Repeat these steps for AFT lavatory
Reading Lights (PSUs) - correct answer > All CRJs (FA Panel):
Press TEST, look down length of cabin at PSUs, then press OFF
PSU Test - correct answer > ERJ (FWD FA Panel):
, 1. Press TEST to view following items operable
-FA indicator panel
-PSU reading lights
-FA call lights
-Lavatory lights on BRT
-FA area indicator lights
-Lavatory occupied signs on bulkheads
Panel Lights - correct answer > ERJ:
-Verify lights next to buttons on FA panel are operational
-Press and hold TEST button to view operable FA panel lights
Emergency Lights - correct answer > CRJ 200 (FA Panel): Verify
operational
1. Lift red guard, move switch to ON, and verify lights are
operational in cabin:
- Aisle lights, ceiling pods, flood lights, and luminescent paths
2. Turn EMG lights off immediately after inspecting
Communication System - correct answer > CRJ 200 (Interphone
on FA Panel): Verify operational