Craftsman Correct Questions &
Answers!!
Departure From Specifications are approved as either imminent or minor depending
on the nature of the non-compliance and technical determination of whether the
condition needs to be repaired. - ANSWERFalse
The two categories of Audits are major and minor? - ANSWERTrue
TMDE should be examined to ensure it is calibrated and the physical integrity is
physical before use? - ANSWERTrue
What is a QA form 17? - ANSWERTest and inspection record
How often should the Quality Assurance Officer review and update the Quality
Assurance training topics? - ANSWERAnnually
Safety is not a concern of a craftsman during maintenance? - ANSWERFalse
The three types of Technical Work Documents include? - ANSWERMaintenance
Procedure (MP), Formal Work Package (FWP), Controlled Work Package (CWP)
What manual provides procedure and guidance to ensure with a reasonable level of
confidence that work performed is accomplished with first time quality? -
ANSWERJFMM (COMFLTFORCOMIST 4790.3 Vol. V)
What mechanism is used to document and resolve a lack of compliance with any
authoritative document, plan, procedure, or instruction? - ANSWERDeparture From
Specifications (DFS)
What are the two different types of Departures From Specifications (DFS)? -
ANSWERMajor and minor
What document provides the CO with an internal review of the overall adequacy and
effectiveness of the Quality Assurance program? - ANSWEREvaluation
What does the (I) in the margin mean when working a Formal Work Package
(FWP)? - ANSWERRequires inspection by a Quality Assurance Inspector (QAI) or
NDT Inspector
What does the (V) in the left margin of a Formal Work Package (FWP) stand for? -
ANSWERRequires verification by a craftsman
What does TMDE stand for? - ANSWERTest, Measuring, Diagnostic Equipment
What program was developed to assure maintenance of the modern day fleet is
performed in accordance with technical specifications thus ensuring the highest state
of material readiness? - ANSWERQuality Assurance
Answers!!
Departure From Specifications are approved as either imminent or minor depending
on the nature of the non-compliance and technical determination of whether the
condition needs to be repaired. - ANSWERFalse
The two categories of Audits are major and minor? - ANSWERTrue
TMDE should be examined to ensure it is calibrated and the physical integrity is
physical before use? - ANSWERTrue
What is a QA form 17? - ANSWERTest and inspection record
How often should the Quality Assurance Officer review and update the Quality
Assurance training topics? - ANSWERAnnually
Safety is not a concern of a craftsman during maintenance? - ANSWERFalse
The three types of Technical Work Documents include? - ANSWERMaintenance
Procedure (MP), Formal Work Package (FWP), Controlled Work Package (CWP)
What manual provides procedure and guidance to ensure with a reasonable level of
confidence that work performed is accomplished with first time quality? -
ANSWERJFMM (COMFLTFORCOMIST 4790.3 Vol. V)
What mechanism is used to document and resolve a lack of compliance with any
authoritative document, plan, procedure, or instruction? - ANSWERDeparture From
Specifications (DFS)
What are the two different types of Departures From Specifications (DFS)? -
ANSWERMajor and minor
What document provides the CO with an internal review of the overall adequacy and
effectiveness of the Quality Assurance program? - ANSWEREvaluation
What does the (I) in the margin mean when working a Formal Work Package
(FWP)? - ANSWERRequires inspection by a Quality Assurance Inspector (QAI) or
NDT Inspector
What does the (V) in the left margin of a Formal Work Package (FWP) stand for? -
ANSWERRequires verification by a craftsman
What does TMDE stand for? - ANSWERTest, Measuring, Diagnostic Equipment
What program was developed to assure maintenance of the modern day fleet is
performed in accordance with technical specifications thus ensuring the highest state
of material readiness? - ANSWERQuality Assurance
