CWB MODULE 1 HEALTH AND SAFETY
REVIEW CORRECT 100%
CREATING A SAFE WORKING ENVIRONMENT IS STRICTLY THE
RESPONSIBILITY OF THE EMPLOYER? FALSE OR TRUE - ANSWERFALSE
WHAT ARE 3 WAYS THAT WHIMIS INFORMATION IS CONVEYED IN THE
WORKPLACE - ANSWERLABLES
MATERIAL SAFETY DATA SHEETS
TRAINING
IT IS THE JOINT RESPONSIBILITY OF THE EMPLOYEE AND EMPLOYER
WHAT DOES WHMIS STAND FOR? - ANSWERWORKPLACE HAZARDOUS
MATERIALS INFORMATION SYSTEM
IF YOU WISHED TO FIND OUT THE HAZARDOUS INGREDIENTS OF A
PRODUCT AND THEIR TOXICOLOGICAL PROPERTIES, WHERE WOULD YOU
LOOK? - ANSWERMATERIAL SAFETY DATA SHEET (MSDS)
IS THERE A CANADIAN STANDARD FOR SAFETY IN WELDING? IF YES, WHAT
IS IT CALLED - ANSWERYES
CSA W117.2
WHAT IS THE TYPICAL THREE PHASE INPUT VOLTAGE TO WELDING
MACHINES IN MOST SHOPS? - ANSWER480V IN THE U.S.A. & 575V IN
CANADA
THE VOLTAGE ON THE SECONDARY SIDE OF WELDING MACHINES IS
ALWAYS SO LOW THERE CAN NEVER BE DANGER OF ELECTRIC SHOCKS
TRUE OR FALSE - ANSWERFALSE
WHY IS IT POSSIBLE TO STILL GET A SHOCK BY TOUCHING ONLY ONE WIRE
OF AN ELECTRIC CIRCUIT? - ANSWERTHE CURRENT CAN PASS THROUGH
THE HUMAN BODY AND RETURN TO THE GROUND
WHAT IS THE "WORK LEAD" - ANSWERTHE CABLE FROM THE WORKPIECE
BACK TO THE WELDING MACHINE
CAN YOU SUFFER SUNBURN ON EXPOSED SKIN JUST BEING NEAR A
WELDING ARC - ANSWERYES
WHAT IS THE RECOMMENDED SHADE NUMBER FOR A WELDERS HELMET
WHEN USING A 5/32in SMAW ELECTRODE AT ABOUT 150A - ANSWER10
REVIEW CORRECT 100%
CREATING A SAFE WORKING ENVIRONMENT IS STRICTLY THE
RESPONSIBILITY OF THE EMPLOYER? FALSE OR TRUE - ANSWERFALSE
WHAT ARE 3 WAYS THAT WHIMIS INFORMATION IS CONVEYED IN THE
WORKPLACE - ANSWERLABLES
MATERIAL SAFETY DATA SHEETS
TRAINING
IT IS THE JOINT RESPONSIBILITY OF THE EMPLOYEE AND EMPLOYER
WHAT DOES WHMIS STAND FOR? - ANSWERWORKPLACE HAZARDOUS
MATERIALS INFORMATION SYSTEM
IF YOU WISHED TO FIND OUT THE HAZARDOUS INGREDIENTS OF A
PRODUCT AND THEIR TOXICOLOGICAL PROPERTIES, WHERE WOULD YOU
LOOK? - ANSWERMATERIAL SAFETY DATA SHEET (MSDS)
IS THERE A CANADIAN STANDARD FOR SAFETY IN WELDING? IF YES, WHAT
IS IT CALLED - ANSWERYES
CSA W117.2
WHAT IS THE TYPICAL THREE PHASE INPUT VOLTAGE TO WELDING
MACHINES IN MOST SHOPS? - ANSWER480V IN THE U.S.A. & 575V IN
CANADA
THE VOLTAGE ON THE SECONDARY SIDE OF WELDING MACHINES IS
ALWAYS SO LOW THERE CAN NEVER BE DANGER OF ELECTRIC SHOCKS
TRUE OR FALSE - ANSWERFALSE
WHY IS IT POSSIBLE TO STILL GET A SHOCK BY TOUCHING ONLY ONE WIRE
OF AN ELECTRIC CIRCUIT? - ANSWERTHE CURRENT CAN PASS THROUGH
THE HUMAN BODY AND RETURN TO THE GROUND
WHAT IS THE "WORK LEAD" - ANSWERTHE CABLE FROM THE WORKPIECE
BACK TO THE WELDING MACHINE
CAN YOU SUFFER SUNBURN ON EXPOSED SKIN JUST BEING NEAR A
WELDING ARC - ANSWERYES
WHAT IS THE RECOMMENDED SHADE NUMBER FOR A WELDERS HELMET
WHEN USING A 5/32in SMAW ELECTRODE AT ABOUT 150A - ANSWER10
