CA Smog Check Inspector Training Part 2 - Final
Review: Questions And Answers
If the BAR97 EIS displays an HC Hang-up Error, what should the inspector do?
Right Ans - Verify the Zero Air gas valve is open and the probe is not in the
vehicle tailpipe.
What action should be taken if it is determined that the underhood label does
not match the engine? Right Ans - Determine if either the hood or engine
has been changed.
If it is determined that a hood has been replaced and the underhood label is
missing or incorrect for the vehicle, what action should be taken? Right Ans
- Consult the ECS manual to determine required equipment and timing
settings.
If it is determined that an engine has been changed and the vehicle is not
equipped with a BAR Referee Label, what action should be taken? Right
Ans - Refer the vehicle to the referee for certification.
What is the minimum amount a consumer must spend before they become
eligible for a Repair Cost Waiver? Right Ans - $650
The Consumer Assistance Program will pay a maximum of __________ toward
the cost of an eligible repair. Right Ans - $500, minus a $20 deductible
During a functional test of the EGR system, the RPM does not change when
vacuum is applied. What are some possible causes? Right Ans - Stuck EGR
pintle, plugged EGR passage
Prior to restraining the vehicle, what should the technician do? Right Ans -
Center the vehicle on the dyno.
If the technician attempts to access the BAR97 EIS to replace internal
computer components, the 5-gas bench, or pumps, what will occur? Right
Ans - The BAR 97 EIS will lock out, requiring a service call for repair. It is
illegal for technician to access the internal portion of the machine?
Review: Questions And Answers
If the BAR97 EIS displays an HC Hang-up Error, what should the inspector do?
Right Ans - Verify the Zero Air gas valve is open and the probe is not in the
vehicle tailpipe.
What action should be taken if it is determined that the underhood label does
not match the engine? Right Ans - Determine if either the hood or engine
has been changed.
If it is determined that a hood has been replaced and the underhood label is
missing or incorrect for the vehicle, what action should be taken? Right Ans
- Consult the ECS manual to determine required equipment and timing
settings.
If it is determined that an engine has been changed and the vehicle is not
equipped with a BAR Referee Label, what action should be taken? Right
Ans - Refer the vehicle to the referee for certification.
What is the minimum amount a consumer must spend before they become
eligible for a Repair Cost Waiver? Right Ans - $650
The Consumer Assistance Program will pay a maximum of __________ toward
the cost of an eligible repair. Right Ans - $500, minus a $20 deductible
During a functional test of the EGR system, the RPM does not change when
vacuum is applied. What are some possible causes? Right Ans - Stuck EGR
pintle, plugged EGR passage
Prior to restraining the vehicle, what should the technician do? Right Ans -
Center the vehicle on the dyno.
If the technician attempts to access the BAR97 EIS to replace internal
computer components, the 5-gas bench, or pumps, what will occur? Right
Ans - The BAR 97 EIS will lock out, requiring a service call for repair. It is
illegal for technician to access the internal portion of the machine?
