Revit Certification exam prep UPDATED
ACTUAL Questions and CORRECT
Answers
question - CORRECT ANSWER✔✔- answer
Where is the keynote numbering method controlled? - CORRECT ANSWER✔✔- Keynoting
settings
An electrical designer is working in a project with a linked architectural Revit model. The
designer is unable to select the link. What is causing this condition? - CORRECT
ANSWER✔✔- The Select Links option is disabled.
When there are numerous types of lighting fixtures available, how can a user narrow the list?
- CORRECT ANSWER✔✔- Use the Search field.
An electrical designer is creating a panel schedule template and is trying to drag the right
boundary line to make the panel schedule wider. The designer is unable to do so. What should
the designer do? - CORRECT ANSWER✔✔- Open the Set Template Options and increase
the Total width.
An electrical designer needs to set the Connection Type for a circuit to Feed Through Lugs.
What does the designer need to do to enable this functionality? - CORRECT ANSWER✔✔-
Select the panel and enable Feed Through Lugs in the Properties palette.
An electrical designer is tagging conduit in a building model. Some of the conduit is at an
angle. The designer wants the tags to rotate with the conduit. What should the designer do? -
CORRECT ANSWER✔✔- Open the tag family and enable Rotate with component.
An electrical designer enables Section Box for a 3D view, but the section box is not visible in
the view. Which setting should the designer check? - CORRECT ANSWER✔✔-
Visibility/Graphic Overrides
, When hovering the cursor over a component on a circuit, which key can be used to highlight
the circuit? - CORRECT ANSWER✔✔- Tab
An electrical designer is reviewing a building model and wants to see all the circuits along
with the Load for each system. Where can the designer review this information? - CORRECT
ANSWER✔✔- System Browser
An electrical designer wants to associate the Elevation from Level parameter for several
receptacles in a project to a single parameter. What type of parameter should the designer
create? - CORRECT ANSWER✔✔- Global
What is the recommended best practice for creating a family? - CORRECT ANSWER✔✔-
Reference planes > dimensions > parameters > geometry
An electrical designer wants to add a parameter to system family categories and loadable
family categories. What type of parameter should the designer create? - CORRECT
ANSWER✔✔- Project
An electrical designer is creating an unground conduit plan. Which view setting should the
designer adjust to show conduit beneath the associated level of the view? - CORRECT
ANSWER✔✔- View Range
An electrical designer selects a run of conduit and changes the phase status to demolished.
After doing this, an error appears stating that the elements need to be disconnected. Why does
this error occur? - CORRECT ANSWER✔✔- Demolished elements cannot be connected.
An electrical designer places hosted lighting fixtures in the ceiling of a linked architectural
model. The designer then removes the linked architectural model. What happens to the
lighting fixtures? - CORRECT ANSWER✔✔- The lighting fixtures become orphaned.
An electrical designer modifies a panel schedule template, but the panel schedules associated
with the template do not update. What should the designer do? - CORRECT ANSWER✔✔-
Select the panels in the Manage Panel Schedule Templates dialog and click Update
Schedules.
ACTUAL Questions and CORRECT
Answers
question - CORRECT ANSWER✔✔- answer
Where is the keynote numbering method controlled? - CORRECT ANSWER✔✔- Keynoting
settings
An electrical designer is working in a project with a linked architectural Revit model. The
designer is unable to select the link. What is causing this condition? - CORRECT
ANSWER✔✔- The Select Links option is disabled.
When there are numerous types of lighting fixtures available, how can a user narrow the list?
- CORRECT ANSWER✔✔- Use the Search field.
An electrical designer is creating a panel schedule template and is trying to drag the right
boundary line to make the panel schedule wider. The designer is unable to do so. What should
the designer do? - CORRECT ANSWER✔✔- Open the Set Template Options and increase
the Total width.
An electrical designer needs to set the Connection Type for a circuit to Feed Through Lugs.
What does the designer need to do to enable this functionality? - CORRECT ANSWER✔✔-
Select the panel and enable Feed Through Lugs in the Properties palette.
An electrical designer is tagging conduit in a building model. Some of the conduit is at an
angle. The designer wants the tags to rotate with the conduit. What should the designer do? -
CORRECT ANSWER✔✔- Open the tag family and enable Rotate with component.
An electrical designer enables Section Box for a 3D view, but the section box is not visible in
the view. Which setting should the designer check? - CORRECT ANSWER✔✔-
Visibility/Graphic Overrides
, When hovering the cursor over a component on a circuit, which key can be used to highlight
the circuit? - CORRECT ANSWER✔✔- Tab
An electrical designer is reviewing a building model and wants to see all the circuits along
with the Load for each system. Where can the designer review this information? - CORRECT
ANSWER✔✔- System Browser
An electrical designer wants to associate the Elevation from Level parameter for several
receptacles in a project to a single parameter. What type of parameter should the designer
create? - CORRECT ANSWER✔✔- Global
What is the recommended best practice for creating a family? - CORRECT ANSWER✔✔-
Reference planes > dimensions > parameters > geometry
An electrical designer wants to add a parameter to system family categories and loadable
family categories. What type of parameter should the designer create? - CORRECT
ANSWER✔✔- Project
An electrical designer is creating an unground conduit plan. Which view setting should the
designer adjust to show conduit beneath the associated level of the view? - CORRECT
ANSWER✔✔- View Range
An electrical designer selects a run of conduit and changes the phase status to demolished.
After doing this, an error appears stating that the elements need to be disconnected. Why does
this error occur? - CORRECT ANSWER✔✔- Demolished elements cannot be connected.
An electrical designer places hosted lighting fixtures in the ceiling of a linked architectural
model. The designer then removes the linked architectural model. What happens to the
lighting fixtures? - CORRECT ANSWER✔✔- The lighting fixtures become orphaned.
An electrical designer modifies a panel schedule template, but the panel schedules associated
with the template do not update. What should the designer do? - CORRECT ANSWER✔✔-
Select the panels in the Manage Panel Schedule Templates dialog and click Update
Schedules.
