ASVAB: Mechanical Comprehension Questions and Correct Answers the Latest Update

An induction clutch works by magnetism If the first-class lever with a resistance arm measuring 2 feet and an effort arm measuring 8 feet are being used, what's the mechanical advantage? 4 The bottom of four boxes are shown below. The boxes all have the same volume. If postal regulations state that the sides of a box must meet a minimum height, which box is most likely to be too short to go through the mail? No. 3 Looking at the figure below, when Anvil B lands on the seesaw, Anvil A will rise in the air quickly Air pressure at sea level is about 15 psi. What's the amount of force exerted on the top of your head, given a surface area of 24 square inches? 360 pounds #Examify | #OnlineExams | #TestPrep | #StudyResources | #AcademicSuccess | #ExamPreparation | #QuizTime | #LearningTools | #Education | #StudentSupport Examify | Smart Grades | Latest update The force produced when a boxer's hand hits a heavy bag and "bounces" off it is called recoil In the figure below, if Gear 1 has 25 teeth and Gear 2 has 15 teeth, how many revolutions does Gear 2 make for every 10 revolutions Gear 1 makes? about 16 2/3 A cubit foot of water weights about 62.5 pounds. If an aquarium is 18 feet long, 10 feet deep, and 12 feet wide, what's the approximate pressure in pounds per square inch (psi) on the bottom of the tank? 4 psi Springs use in machines are usually made of steel A clutch is a type of coupling When Cam A completes one revolution, the lever will touch the contact point twice A single block-and-fall is called a #Examify | #OnlineExams | #TestPrep | #StudyResources | #AcademicSuccess | #ExamPreparation | #QuizTime | #LearningTools | #Education | #StudentSupport Examify | Smart Grades | Latest update runner In the figure below, if the fulcrum supporting the lever is moved closer to the anvil, the anvil will be easier to life, but will not move as high The mechanical advantage