All vehicle crash scene hazards fall into one of the 3 categories that offer risk to the
rescuer and patient: - Answer- Environmental, Incident-Scene and Vehicle Hazards
Two procedures that make airbag systems less likely to deploy during rescue
operations are: - Answer- Turn off ignition and disconnect disconnect electrical
power
When confronted with a fuel leak or spill: - Answer- rescuers should identify the
source position multipurpose, dry - chemical fire extinguisher as a quick way to
establish a basic level of standby suppression
True or False: Weather, time of day and location, is all that command needs to
consider on initial size-up while responding to the accident scene - Answer- True
According to OSHA, on older air chisels, the "beehive" style retainer system: -
Answer- Does NOT meet current safety requirements
A reciprocating saw is the most efficient model for vehicle rescue applications
because: - Answer- It allows the rescuer to use each saw blade more efficiently
For maximum efficiency with a curved blade cutter, rescuers should position the
blades of the tool: - Answer- completely around the object being cut
When it is most effective, the process by which rescuers gain initial access to the
patient takes no more than: - Answer- 60 seconds
Incidents involving machinery extrication may include: - Answer- metal cutting
forming equipment
farm machinery
construction equipment
lifting
moving
transfer equipment
hydraulic equipment systems can be driven by: - Answer- Electric motors
Gas engines
Diesel engines
Machinery stabilization can be driven by: - Answer- cribbing
shutting off gas/fuel
lockout-tagout
True or False
Most electrocutions and electrical injuries in an agricultural-rural setting are due to
direct contact or proximity arcing from overhead power lines - Answer- True
, During the termination stage: - Answer- Rescue personnel
service the vehicles
place tools/equipment back on the vehicle
Vehicle extrication/rescue operations may expose rescuers to the following hazards:
- Answer- Air bag systems and energy absorbing bumper systems
A common bond in the death of responders working in or near moving traffic is: -
Answer- traffic was not effectively controlled
A technique to limit bystanders from viewing the scene is - Answer- emergency
personnel standing side by side
Statistics show that the crash of and emergency vehicle responding to or returning
from a scene is most likely to occur: - Answer- typically level, dry intersection with
either stop signs or yield signs posted, or operating traffic light
True or False:
Incident command system should be used at all incidents, regardless of their size or
complexity - Answer- True
Blocking is defined as - Answer- keeping approaching traffic from entering the scene
True or False
Softwood is acceptable for cribbing blocks if it is used properly and not overloaded -
Answer- True
The recommended minimum capacity rating for a come-a-long used for vehicle
rescue work is - Answer- 2 tons
When pulling with a heavy hydraulic power rescue spreaders - Answer- rescuers
must use chain and hook assemblies that are equal to or greater in quality and ;load
rating those supplied by manufacturer of the tool
If a bumper piston was exposed to heat - Answer- It could potentially launch 300 ft
Patient packing refers to two distinctly different actions: - Answer- packing the pt and
dealing with specific injuries
ROPS definition - Answer- Roll Over Protection System
which of the following is FALSE about how you can shut down the engine of a tractor
- Answer- Turning off the key will shut down all diesel tractor engines
Which is correct for the Termination stage - Answer- All fluids should be checked out
and filled, critique the incident as soon as possible and CISD needs to be considered
if it is necessary at this time