Oregon Tattoo License Questions With
Solutions
what type of metal should the contact screw be made of to have the highest conductivity
brass
how does the armature bar hit the front coil core flat full contact
what do you want the frame on your tattoo machine to be? nonconductive
what happens when your machine is conductive or electrified it stays on with the armature
bar sticking to the coils
what diameter should your binding post be 5/16ths
what happens if u use a steel contact screw? can cause sparks
when setting up your machine why would you snug down the eye of the needle bar
prevent weak jumpy lines
, Oregon Tattoo License Questions With
Solutions
why is a one piece contact screw the best choice adding things can cause vibration
what are two advantages of a brass contact screw 100% conductive and it keeps it shape
for longer than other metals
how much if the contact screw needs to be touching the front spring ? tiny contact area
why don't you use a coated spring coating wears away and causes a bad connection
what kind of reaction do you expect from a machine with a very low spring angle? weak
and spongey
which type of machine benefits best from a shorter spring? liner
which spring is most important for tuning the machine rear
a machine is hard hitting and fast running moves the needle in and out of the skin so fast that
not enough pigment is left behind
, Oregon Tattoo License Questions With
Solutions
what is the ideal width of the springs used on the machine springs should be equally as
wide as what they are attached to
what types of screws should you use to hold coils to the frame a flush magnetic screw
tube vise function is to firmly hold the tube in place and properly align the tube while the
machine is in use
how should a tube vise hold a tube in comparison to the machine front to back and side to
side
what is the most important part of the tattoo machine coils
what is the coils purpose to run consistently and not loose power
what is a possible reason for the machine to not work at all debris between contact screw
and front spring
Solutions
what type of metal should the contact screw be made of to have the highest conductivity
brass
how does the armature bar hit the front coil core flat full contact
what do you want the frame on your tattoo machine to be? nonconductive
what happens when your machine is conductive or electrified it stays on with the armature
bar sticking to the coils
what diameter should your binding post be 5/16ths
what happens if u use a steel contact screw? can cause sparks
when setting up your machine why would you snug down the eye of the needle bar
prevent weak jumpy lines
, Oregon Tattoo License Questions With
Solutions
why is a one piece contact screw the best choice adding things can cause vibration
what are two advantages of a brass contact screw 100% conductive and it keeps it shape
for longer than other metals
how much if the contact screw needs to be touching the front spring ? tiny contact area
why don't you use a coated spring coating wears away and causes a bad connection
what kind of reaction do you expect from a machine with a very low spring angle? weak
and spongey
which type of machine benefits best from a shorter spring? liner
which spring is most important for tuning the machine rear
a machine is hard hitting and fast running moves the needle in and out of the skin so fast that
not enough pigment is left behind
, Oregon Tattoo License Questions With
Solutions
what is the ideal width of the springs used on the machine springs should be equally as
wide as what they are attached to
what types of screws should you use to hold coils to the frame a flush magnetic screw
tube vise function is to firmly hold the tube in place and properly align the tube while the
machine is in use
how should a tube vise hold a tube in comparison to the machine front to back and side to
side
what is the most important part of the tattoo machine coils
what is the coils purpose to run consistently and not loose power
what is a possible reason for the machine to not work at all debris between contact screw
and front spring
