Autocad certification UPDATED ACTUAL
Exam Questions and CORRECT Answers
Grip mode - CORRECT ANSWER✔✔- it allows you to edit the size, position, and rotation
of a selected object
Where do you go to change snap and grid settings? - CORRECT ANSWER✔✔- 1. Bottom
told bar right click on icon for Snap Mode, click on settings
2. In drafting settings under snap and grid
How to use the Window Polygon command - CORRECT ANSWER✔✔- 1. In command line
enter SELECT and press enter
2. Type WP and press enter
3. click in the area you want
What is the correct method of selecting the object to stretch one of its legs? - CORRECT
ANSWER✔✔- Use a crossing window
Which key command allows you to cycle through snaps? - CORRECT ANSWER✔✔- Tab
When rotating an object in the object rotates around - CORRECT ANSWER✔✔- the base
point
Creating an object using inferred constrains automatically applies coincident constraints for
all of the following object snaps except for - CORRECT ANSWER✔✔- Midpoint
Which allows you to view a drawing in 3D? - CORRECT ANSWER✔✔- Use the view cube
and Hold shift + middle mouse button
How to add a note - CORRECT ANSWER✔✔- 1. go to annotation drop down
2. click on big A
3. enter note
, Which of the following volume calculations method is limited to material lists that have only
two surfaces and cannot be used for material list that contain corridor shapes? - CORRECT
ANSWER✔✔- The composite method
Which is not a valid plot area property? - CORRECT ANSWER✔✔- full
window - CORRECT ANSWER✔✔- plots any portion of a drawing that you specify
display - CORRECT ANSWER✔✔- plots what is currently displayed on screen
extents - CORRECT ANSWER✔✔- plots everything
layout - CORRECT ANSWER✔✔- plots everything within paper boundaries
How to change the plot of a drawing in the plotting settings - CORRECT ANSWER✔✔- 1.
go to big A
2. print and then plot
How to joint to lines together to create one object - CORRECT ANSWER✔✔- 1.Select the
lines first
2.go to modify
3.click on join
which of the following can Not have a break applied to them - CORRECT ANSWER✔✔-
blocks
what does not benefit of using layouts - CORRECT ANSWER✔✔- layouts constraints
Baseline - CORRECT ANSWER✔✔- allows you to create multiple dimensions that are
measured from a set point
Exam Questions and CORRECT Answers
Grip mode - CORRECT ANSWER✔✔- it allows you to edit the size, position, and rotation
of a selected object
Where do you go to change snap and grid settings? - CORRECT ANSWER✔✔- 1. Bottom
told bar right click on icon for Snap Mode, click on settings
2. In drafting settings under snap and grid
How to use the Window Polygon command - CORRECT ANSWER✔✔- 1. In command line
enter SELECT and press enter
2. Type WP and press enter
3. click in the area you want
What is the correct method of selecting the object to stretch one of its legs? - CORRECT
ANSWER✔✔- Use a crossing window
Which key command allows you to cycle through snaps? - CORRECT ANSWER✔✔- Tab
When rotating an object in the object rotates around - CORRECT ANSWER✔✔- the base
point
Creating an object using inferred constrains automatically applies coincident constraints for
all of the following object snaps except for - CORRECT ANSWER✔✔- Midpoint
Which allows you to view a drawing in 3D? - CORRECT ANSWER✔✔- Use the view cube
and Hold shift + middle mouse button
How to add a note - CORRECT ANSWER✔✔- 1. go to annotation drop down
2. click on big A
3. enter note
, Which of the following volume calculations method is limited to material lists that have only
two surfaces and cannot be used for material list that contain corridor shapes? - CORRECT
ANSWER✔✔- The composite method
Which is not a valid plot area property? - CORRECT ANSWER✔✔- full
window - CORRECT ANSWER✔✔- plots any portion of a drawing that you specify
display - CORRECT ANSWER✔✔- plots what is currently displayed on screen
extents - CORRECT ANSWER✔✔- plots everything
layout - CORRECT ANSWER✔✔- plots everything within paper boundaries
How to change the plot of a drawing in the plotting settings - CORRECT ANSWER✔✔- 1.
go to big A
2. print and then plot
How to joint to lines together to create one object - CORRECT ANSWER✔✔- 1.Select the
lines first
2.go to modify
3.click on join
which of the following can Not have a break applied to them - CORRECT ANSWER✔✔-
blocks
what does not benefit of using layouts - CORRECT ANSWER✔✔- layouts constraints
Baseline - CORRECT ANSWER✔✔- allows you to create multiple dimensions that are
measured from a set point
