ASE A4 Practice Test - ASE A4 Steering and Suspension Test Prep - Test 1 Questions and Answers

ASE A4 Practice Test - ASE A4 Steering and Suspension Test Prep - Test 1 Questions and Answers Raise the vehicle in the air and unload the control arms before torquing them to specifications. - Answer-All of the following are true about control arm bushings EXCEPT: A. Control arm bushings are located between the vehicle's frame and the control arm. B. Worn control arm bushings result in wheel shimmy. C. Raise the vehicle in the air and unload the control arms before torquing them to specifications. D. Control arm bushings reduce friction and isolate vibrations. Technician A - Answer-Technician A says the leaf spring's shackle should swivel as the vehicle travels over bumps. Technician B says that small cracks in the longest blade of a multi- leaf leak spring are acceptable. Who is correct? A. Technician A B. Technician B C. Both A and B EMILLECT 2024/2025 ACADEMIC YEAR ©2024 EMILLECT. ALL RIGHTS RESERVED FIRST PUBLISH OCTOBER, 2024 Page 2/4 D. Neither A nor B Wheel bearing. - Answer-The LEAST likely to result in memory steer is a binding: A. Ball joint. B. Steering gear. C. Upper strut mount. D. Wheel bearing. There is too much negative camber. - Answer-The inside tread of the tire in the illustration shows excessive wear. Which of the following is causing this uneven tire wear? A. There is too much positive camber. B. There is too much positive caster. C. There is too much negative camber. D. There is too much negative caste