Swimming pool operator certification Exam Questions With Verified Answers.

Swimming pool operator certification Exam Questions With Verified Answers. First step of fecal accident procedure - answerDirect all bathers to leave the pool. All affected waters must be closed to swimming until proper procedures for contamination have been completed Second step of fecal accident procedure - answerManually remove as much of the material as possible using a net or scoop and dispose of it in a sanitary manner. Clean and disinfect the scoop or net. After cleaning leave the net or scoop immersed in the pool during this infection. Vacuuming the stool is not allowed. Establish a fecal accident log documenting....? - answer(1) the date and time of the event (2) if the accident is a result of a form stools or diarrhea (3) The free available chlorine concentration at the time or observation of the event and before opening the public pool (4) The pH (5) The procedures followed to respond to the fecal accident including the process used to increase free chlorine residual if necessary (6) The contact time Procedures for form stool that is solid and not liquid - answerRaise the free available chlorine level to 2 ppm and ensure that the pH is between 7.2 and 7.5 Maintain the chlorine concentration for at least 25 minutes. Ensure this concentration is found throughout all waters by sampling at least three widely spaced locations away from return outlets Procedures for diarrhea liquid or non-form stools - answerRaise the free available chlorine level two 20 ppm and ensure that the pH is between 7.2 and 7.5 Maintain the chlorine concentration and pH for eight hours while ensuring that the filtration system is operating. Backwash the filter thoroughly discharging the effluent directly to waste. Where appropriate replace the filter media ©BRAINBARTER 2024/2025 Bathers may be allowed into pool after chlorine concentration has been returned to normal operating ranges Acid demand - answerThe amount of acid required to reduce pH and alkalinity to the correct range Algae - answerMicroscopic plant like organisms that grow in water do to warm temperatures and in adequate sanitizer. Algae can be green blue green black or yellow green (mustard). Alkalinity - answerA measure of the ability of pool water to resist changes in pH. Buffering capacity of water. Balanced water - answerThe correct ratio of hardness, alkalinity, temperature, dissolved solids, and pH that prevent pool water from being either corrosive or scale forming Bromine - answerA chemical element that exists as a liquid in its elemental form or as part of a chemical compound that is an oxidant and a biocidal agent used to disinfect pool, spa and hot tub water. Bromamine - answerBromine-ammonia compounds formed when the bromine in the water combines with ammonia, nitrogen or swimmer or bather waste. Unlike Chloramines they do not smell or irritate the body. They are active sanitizers. Calcium hardness - answerThe amount of dissolved calcium in the pool. High levels promote scale and cloudy water. Low levels promote corrosion of the pool or spa equipment. Cavitation - answerFormation of partial vacuums when the pump exceeds the water supply Chlorine - answerA chemical element that exists as a gas in its elemental form or as a part of a chemical compound that is an oxidant and a biocidal agent used in pool, spa, and hot tub disinfection Chlorine demand - answerThe amount of chlorine necessary to destroy the germs, algae, and other impurities in the water. Demand refers to the amount required before chlorine can be made available to continue sanitizing the pool, spa, or hot tub water. Chloramines - answerA compound formed when chlorine combines with ammonia, nitrogen, or swimmer or bather wastes. They cause eye and skin irritation, and they have a strong objectionable odor. Chlorine residual - answerThe amount of measurable chlorine remaining after treating water with chlorine to disinfect and oxidize contaminants. It may also be explained as the amount of chlorine left after satisfying the chlorine demand. ©BRAINBARTER 2024/2025 Free available chlorine (FAC) - answerThe portion of total chlorine remaining in chlorinated water that is not combined with ammonia or nitrogen compounds and will react chemically with undesirable or disease causing organisms Conditioner - answerAlso called cyanuric acid, stabilizer, Isocyanuric acid and Triazinetrione- A chemical that helps reduce the excessive loss of chlorine in water due to ultraviolet rays of the sun. Copper - answerMetallic element that forms compounds causing green or blue green water, green or blue green stains in pool or spa surfaces and green hair or blue fingernails on swimmers and bathers. Cross connection - answerAn unprotected connection between a domestic water supply and the pool. Protective devices must be used to eliminate possible contamination. DPD - answer(Diethel-P-Phenylene Diamine) A reagent and test method that specifically measures the free available chlorine and total chlorine. It produces a series of colors from pink to red. Flow meter - answerA device that measures pressure differential across a calibrated orifice and indicates a rate of flow at that point usually given in gallons per minutes Hard water - answerWater that has a high level of calcium and magnesium dissolved in it Iron - answerA metallic element that forms compounds causing orange or brown colored water and orange or brown colored stains on pool or spa walls Oxidation reduction potential - answerA method of measuring the potential, which often relates to the concentration of an oxidizer in the pool water. ORP probes send signals to electrical controllers that can control valves on chemical feeders to dissolve and release disinfectants. Pathogen - answerMicro organism that causes disease in humans. pH - answerValue expressing the relative acidity or alkalinity Of pool or spa water as indicated by hydrogen ion concentration. It is expressed as a number between zero and 14. Low pH values cause corrosion of equipment and pool or spa surfaces. High pH values cause scale and reduce the effectiveness of sanitizers. ppm - answerParts per million Phenol red - answerA red chemical reagent that reacts with the hydrogen ion in pool or spa water to indicate the pH value Residual - answerThe concentration of a chemical (typically the disinfectant) in water.