Printreading for Residential and Light Commercial
Construction Chapter 3 Sixth Edition Exam 2024-2025
The top member of an interior partition is a double top ______.
Pag 113 - Answer Plate.
A ______ stud is placed at each side of the rough window opening to support the header.
Pag 115 - Answer Trimmer.
Shrinkage is reduced in the ______ framing by using continuous studs from the sill plate
to the double top plate.
Pag 116 - Answer Balloon.
Stairs in A-frame houses are usually ______. - Answer Steep.
______ ties hold spacing in foundation walls during the placement of concrete.
Pag 121 - Answer Snap.
A ______ is a brick ledge that carries a load.
Pag 125 - Answer Corbel.
Brick veneer is ______ wythes thick.
Pag 128 - Answer One.
The ______ load consists of the weight of the permanent structure of a building.
Pag 111 - Answer Dead.
, The double top plates of walls and partitions in platform framing are _____ at the corners
and intersections for nailing.
Pag 113 - Resposta overlapped.
_____ framing provides an open architectural effect.
Pag 118 - Resposta Post and beam.
A(n) _____ insulated panel consists of a layer of insulating foam between two OSB or
plywood panels.
Pag 118 - Resposta Structural insulated panel (SIP).
_____are used as top and bottom plates in metal wall framing.
Pag 128- Answer Tracks.
SCR brick is used for cavity walls.
T/F
Pag 125- Answer False.
Brick walls backed by concrete masonry units are tied together with header courses of
brick
T/F
Pag 126 - Answer True.
Cavity walls are brick walls made of two wythes with an air space between the wythes.
T/F
Pag 127 - Answer True.
Brick Veneer is combined with wood or metal framing.
Construction Chapter 3 Sixth Edition Exam 2024-2025
The top member of an interior partition is a double top ______.
Pag 113 - Answer Plate.
A ______ stud is placed at each side of the rough window opening to support the header.
Pag 115 - Answer Trimmer.
Shrinkage is reduced in the ______ framing by using continuous studs from the sill plate
to the double top plate.
Pag 116 - Answer Balloon.
Stairs in A-frame houses are usually ______. - Answer Steep.
______ ties hold spacing in foundation walls during the placement of concrete.
Pag 121 - Answer Snap.
A ______ is a brick ledge that carries a load.
Pag 125 - Answer Corbel.
Brick veneer is ______ wythes thick.
Pag 128 - Answer One.
The ______ load consists of the weight of the permanent structure of a building.
Pag 111 - Answer Dead.
, The double top plates of walls and partitions in platform framing are _____ at the corners
and intersections for nailing.
Pag 113 - Resposta overlapped.
_____ framing provides an open architectural effect.
Pag 118 - Resposta Post and beam.
A(n) _____ insulated panel consists of a layer of insulating foam between two OSB or
plywood panels.
Pag 118 - Resposta Structural insulated panel (SIP).
_____are used as top and bottom plates in metal wall framing.
Pag 128- Answer Tracks.
SCR brick is used for cavity walls.
T/F
Pag 125- Answer False.
Brick walls backed by concrete masonry units are tied together with header courses of
brick
T/F
Pag 126 - Answer True.
Cavity walls are brick walls made of two wythes with an air space between the wythes.
T/F
Pag 127 - Answer True.
Brick Veneer is combined with wood or metal framing.
