13. DHCP
the DHCP server and the client use broadcast to communicate with each other. clients go through four
steps to obtain an address from a DHCP server
move the correct steps from the left to the right, and then place them in the order of the occur when a
client is obtaining its IP configuration from a DHCP server. - correct answer ✔✔DHCP discover
DHCP offer
DHCP request
DHCP ack
you are the administrator of what will become a large Windows server network using the TCP/IP
protocol. currently, the network consists of three Windows servers and 50 Windows workstations all on
the same subnet.
during the last meeting you had with the CIO, it was determined that company growth would be adding
workstations and printers to the existing Network for a total of 235 devices. no one segment is to have
more than 85 hosts. The existing hardware like be used on a network as of your devices are added.
how should you assign IP addresses to the workstations on a network to minimize administration? -
correct answer ✔✔configure each workstation to use DHCP. install a DHCP server and configure a single
scope.
you administer a single DHCP server for his network of three subnet. The DHCP server is configured with
three Scopes, one for each subnet. the three subnet addresses are 192.168.1.0, 192.168. 2.0, and
192.168. 3.0 using the default subnet mask.
in addition to assigning IP addresses to the network host, the DHCP server needs to configure the
following:
* DNS server address for all hosts: 192.168.1.11
* default gateway for hosts on the 192.168.1.0 subnet: 192.168.1.1
, * default gateway for hosts on the 192.168. 2.0 subnet: 192.168.2.1
* default gateway for hosts on the 192.168. 3.0 subnet: 192.168. 3.1
how should you configure the DHCP scope options to minimize administrative effort? - correct answer
✔✔configure server options to deliver the DNS server address. configure scope options for each scope
to deliver each subnets designated default gateway address.
you're installing DHCP in for subnet. three of the subnets have Windows desktop computers, and the
fourth subnet has only Windows laptop computers.
on the subnet with the laptops, you want any computer that has not logged on in 2 days to release its IP
address. on the desktop subnets, you want computers that have not logged on in 30 days to release their
IP addresses.
how should you configure the DHCP scopes? - correct answer ✔✔set up one scope for each subnet and
set the lease period as a part of each Scopes configuration
Mark is a system administrator for a network with a single active directory domain. The network has just
expanded to include an additional subnet. Mark has installed a new server running Windows server on
the new subnet configured it as a DHCP server.
when he checks the server icon in the DHCP Management console, he notices the server as a down icon.
he notices that the DHCP server service has started, but the server still does not respond to DHCP lease
request.
what should Mark do to solve the problem? - correct answer ✔✔ask a member of the Enterprise admin
group to authorize the server.
Nadine is a systems administrator for a network with a single subnet. The subnet uses 192.168.1.1 with a
mask of 255.255. 255. 0. the network has 10 servers running Windows server. srv1 currently provides
both DHCP and DNS services.
the DHCP server and the client use broadcast to communicate with each other. clients go through four
steps to obtain an address from a DHCP server
move the correct steps from the left to the right, and then place them in the order of the occur when a
client is obtaining its IP configuration from a DHCP server. - correct answer ✔✔DHCP discover
DHCP offer
DHCP request
DHCP ack
you are the administrator of what will become a large Windows server network using the TCP/IP
protocol. currently, the network consists of three Windows servers and 50 Windows workstations all on
the same subnet.
during the last meeting you had with the CIO, it was determined that company growth would be adding
workstations and printers to the existing Network for a total of 235 devices. no one segment is to have
more than 85 hosts. The existing hardware like be used on a network as of your devices are added.
how should you assign IP addresses to the workstations on a network to minimize administration? -
correct answer ✔✔configure each workstation to use DHCP. install a DHCP server and configure a single
scope.
you administer a single DHCP server for his network of three subnet. The DHCP server is configured with
three Scopes, one for each subnet. the three subnet addresses are 192.168.1.0, 192.168. 2.0, and
192.168. 3.0 using the default subnet mask.
in addition to assigning IP addresses to the network host, the DHCP server needs to configure the
following:
* DNS server address for all hosts: 192.168.1.11
* default gateway for hosts on the 192.168.1.0 subnet: 192.168.1.1
, * default gateway for hosts on the 192.168. 2.0 subnet: 192.168.2.1
* default gateway for hosts on the 192.168. 3.0 subnet: 192.168. 3.1
how should you configure the DHCP scope options to minimize administrative effort? - correct answer
✔✔configure server options to deliver the DNS server address. configure scope options for each scope
to deliver each subnets designated default gateway address.
you're installing DHCP in for subnet. three of the subnets have Windows desktop computers, and the
fourth subnet has only Windows laptop computers.
on the subnet with the laptops, you want any computer that has not logged on in 2 days to release its IP
address. on the desktop subnets, you want computers that have not logged on in 30 days to release their
IP addresses.
how should you configure the DHCP scopes? - correct answer ✔✔set up one scope for each subnet and
set the lease period as a part of each Scopes configuration
Mark is a system administrator for a network with a single active directory domain. The network has just
expanded to include an additional subnet. Mark has installed a new server running Windows server on
the new subnet configured it as a DHCP server.
when he checks the server icon in the DHCP Management console, he notices the server as a down icon.
he notices that the DHCP server service has started, but the server still does not respond to DHCP lease
request.
what should Mark do to solve the problem? - correct answer ✔✔ask a member of the Enterprise admin
group to authorize the server.
Nadine is a systems administrator for a network with a single subnet. The subnet uses 192.168.1.1 with a
mask of 255.255. 255. 0. the network has 10 servers running Windows server. srv1 currently provides
both DHCP and DNS services.
