Forklift OSHA Training Exam Questions
With Solutions
It is safe to give someone a ride on your lift truck. False
Lift trucks use a hydraulic cylinder attached to chains to raise and lower the forks. True
Wide and long loads are more unstable than other types of loads. True
Before loading or unloading a trailer at a loading dock, you should: - Inspect the floor of
the trailer to ensure that it will support the lift truck and the load.
- Chock the wheels of the trailer.
- Make sure that dock plates, boards, and ramps are in place and secure.
A break pedal that sinks to the floor under continued pressure is in good operating condition.
False
All industrial trucks (lift trucks) are equipped with a clutch. False
, Forklift OSHA Training Exam Questions
With Solutions
Of the three load positions illustrated above, which is the most stable? Tilted back
The front wheels of a lift truck serve as the ___ between the weight of the truck and the weight
of the load being carried. Fulcrum point
In order to solve an "Inch Pound Equation", you must use information provided on a truck's data
plate. True
The three major parts of a lift truck are the body (truck), overhead guard, and hydraulic lift.
True
You can place your hands and feet outside of the operator's compartment, as long as your head
and body are protected. False
Always check the air pressure in tires from the side, not by facing the tread. False
The load capacity of a truck can be found on its data plate. True
With Solutions
It is safe to give someone a ride on your lift truck. False
Lift trucks use a hydraulic cylinder attached to chains to raise and lower the forks. True
Wide and long loads are more unstable than other types of loads. True
Before loading or unloading a trailer at a loading dock, you should: - Inspect the floor of
the trailer to ensure that it will support the lift truck and the load.
- Chock the wheels of the trailer.
- Make sure that dock plates, boards, and ramps are in place and secure.
A break pedal that sinks to the floor under continued pressure is in good operating condition.
False
All industrial trucks (lift trucks) are equipped with a clutch. False
, Forklift OSHA Training Exam Questions
With Solutions
Of the three load positions illustrated above, which is the most stable? Tilted back
The front wheels of a lift truck serve as the ___ between the weight of the truck and the weight
of the load being carried. Fulcrum point
In order to solve an "Inch Pound Equation", you must use information provided on a truck's data
plate. True
The three major parts of a lift truck are the body (truck), overhead guard, and hydraulic lift.
True
You can place your hands and feet outside of the operator's compartment, as long as your head
and body are protected. False
Always check the air pressure in tires from the side, not by facing the tread. False
The load capacity of a truck can be found on its data plate. True
