CTS Certification (second edition) Questions
and Correct Answers | Latest Update
The HDTV aspect ratio is expressed as:
✓ -:- 1.78:1
When conducting a site survey at an active construction site what should you confirm FIRST
before arriving onsite?
✓ -:- Required PPE to be onsite.
A field service technician replaces a piece of AV equipment on the client LAN but notices
it's not getting proper IP address. What's the most likely issue?
✓ -:- The new piece of equipment needs to have its MAC registered.
After presenting a proposal to a client, confirming that all objections are answered and that
the final buying decision will be made at an internal meeting, what is the next step?
✓ -:- Communicate regularly, until a decision is made
During discussions with an Architect, a _________ may be most useful when reviewing
drawings.
1 | P a g e | G r a d e A + | 2 0 0 2 5
,2024 /2025 | © copyright | This work may not be copied for profit gain Excel!
✓ -:- Scale
The minimum load safety rating for mounting audio visual equipment is:MAYBE
✓ -:- 5:1
When installing an audiovisual system, a user connects a laptop to an HDMI distribution
amplifier with two monitors connected. The first monitor shows the laptop screen without
any difficulty, the second monitor does not. The likely cause is
✓ -:- EDID
When surveying a room before the start of the job, which of the following is NOT
important?
✓ -:- The color of the conference room walls
A client requires a new boardroom. The sales person and engineer are sent to the premises
to survey the facility and discuss the opportunity with the client. This process is best
described as a ____
✓ -:- Needs Analysis
2 | P a g e | G r a d e A + | 2 0 0 2 5
, 2024 /2025 | © copyright | This work may not be copied for profit gain Excel!
A
quick and accurate means to estimate dimensions of a commercial space during a site
inspection would be to _____?
✓ -:- Count the number of ceiling tiles in a drop tile installation
What is NOT an example of typical safety equipment you'd have readily available for a site
visit? MAYBE
✓ -:- NOT Tools with nonslip handles
An installed audio system should be AT LEAST __________ above the ambient noise floor.
✓ -:- 25 dB
A client requires a front projection system. What drawings should be requested from the
client to select the appropriate lens?
✓ -:- reflected ceiling plans and elevations
Which of the following is NOT an objective of training end users and support staff on the
operation of an AV system.
✓ -:- Eliminate the need for a service contract
3 | P a g e | G r a d e A + | 2 0 0 2 5