Verified Answers. a- a-
According to 29CFR1910.184 which type of sling requires annual
a- a- a- a- a- a- a- a- a-
inspections, with records retained, and be performed by a
a- a- a- a- a- a- a- a- a-
competent person designated by the employer?
a- Alloy steel a- a- a- a- a-a- a- a- a-
chain
When rigging a bundle of pipe or tubing, which hitch would
a- a- a- a- a- a- a- a- a- a- a-
provide the best contact between sling and load?
a- a- Double a- a- a- a- a- a-a- a- a-
wrap choker a-
One leg of a four leg alloy steel chain sling is longer than the
a- a- a- a- a- a- a- a- a- a- a- a- a- a-
other three; this is possible indication of what type of damage ?
a- a- a- a- a- a- a- a- a- a- a- a-a-
The leg has been over loaded
a- a- a- a- a- a-
Which type of sling is required to have permanent affixed
a- a- a- a- a- a- a- a- a- a-
identification tag stating size, grade, rated capacity for hitch type
a- a- a- a- a- a- a- a- a- a-
that can be used?
a- Alloy steel chain sling
a- a- a-a- a- a- a- a-
Where would you measure to check the diameter of wire rope?
a- a- a- a- a- a- a- a- a- a- a-a-
Across the crowns
a- a- a-
, When using a shackle as part of a choker hitch where should the
a- a- a- a- a- a- a- a- a- a- a- a- a-
pin of the shackle be placed ?
a- a- In the eye of the sling
a- a- a- a- a-a- a- a- a- a- a- a-
What is the ASME standard that covers the inspection criteria for
a- a- a- a- a- a- a- a- a- a- a-
hooks ? ASME B 30.10
a- a-a- a- a- a-
What is the purpose of the sheet bend ?
a- a- a- a- a- a- a- a- a-a- a- To tie two different
a- a- a- a-
sizes of rope together
a- a- a-
When installing a wedge socket, it must be attached with the
a- a- a- a- a- a- a- a- a- a- a-
load line pulling in a straight line from the ?
a- a- Pin a- a- a- a- a- a- a- a-a- a-
When using a Jack where does the blocking go ?
a- a- a- a- a- a- a- a- a- a-a- a- In between
a- a-
the jack and the load
a- a- a- a-
When softeners are used to protect the slings, softeners should
a- a- a- a- a- a- a- a- a- a-
be ?
a- Made from rigid material
a-a- a- a- a- a-
When the hoist line is not vertical what type of dynamic force is
a- a- a- a- a- a- a- a- a- a- a- a- a-
being introduced to the crane?
a- Side pull a- a- a- a-a- a- a-
What is the term used to describe the ultimate or maximum load
a- a- a- a- a- a- a- a- a- a- a- a-
that a sling fails at ?
a- a-Breaking strength a- a- a- a-a- a- a-