Module 8 - Drywall Finishing Questions with Correct Answers

Module 8 - Drywall Finishing Questions with Correct
Answers
For Levels 3, 4, and 5, it is recommended that the prepared surface be
coated with a drywall _____.
a. chalk
b. primer
c. compound
d. lacquer Correct Answer-b. primer


Drywall requires different levels of finish depending on lighting
conditions, decorative treatment, and _____.
a. location
b. color
c. manufacturer
d. content Correct Answer-a. location


The highest level of finish that is recommended for gloss, semigloss,
enamel, or nontextured flat paints is _____.
a. Level 0
b. Level 3
c. Level 4
d. Level 5 Correct Answer-d. Level 5

, The only level of finish at which tool marks and ridges are considered
acceptable is Level _____.
a. 0
b. 1
c. 2
d. 3 Correct Answer-c. 2


The metal control hardware used to relieve stresses caused by expansion
and contraction in large ceiling or wall expanses in interior drywall
systems is called a(n) _____.
a. L-bead
b. J-bead
c. corner bead
d. expansion joint Correct Answer-d. expansion joint


The three types of reinforcing tape for drywall use are paper, metal edge,
and _____.
a. fiberglass mesh
b. perforated
c. glue backed
d. dustless Correct Answer-a. fiberglass mesh


A type of trim that can be used as an edging or border on an arched
opening is _____.
a. reveal trim