module drywall finishing questions with correct
answers
For Levels 3, 4 and 5, it is recommended that the prepared surface be
coated with a drywall Correct Answer-Primer
Drywall requires different levels of finish depending on lighting
conditions, decorative treatment, and Correct Answer-Location
The highest level of finish that is recommended for gloss, semigloss,
enamel, or nontextured flat paints is Correct Answer-Level 5
The only level of finish at which tool marks and ridges are considered
acceptable is Correct Answer-1
The metal control hardware used to relieve stresses caused by expansion
and contraction in large ceiling or wall expanses in interior drywall
systems is called a(n Correct Answer-Expansion joint
The three types of reinforcing tape for drywall use are paper, metal edge,
and Correct Answer-Fiberglass mesh
A type of trim that can be used as an edging or border on an arched
opening is Correct Answer-Reveal trim
One disadvantage of using premix compound is that it must be kept from
Correct Answer-Freezing
answers
For Levels 3, 4 and 5, it is recommended that the prepared surface be
coated with a drywall Correct Answer-Primer
Drywall requires different levels of finish depending on lighting
conditions, decorative treatment, and Correct Answer-Location
The highest level of finish that is recommended for gloss, semigloss,
enamel, or nontextured flat paints is Correct Answer-Level 5
The only level of finish at which tool marks and ridges are considered
acceptable is Correct Answer-1
The metal control hardware used to relieve stresses caused by expansion
and contraction in large ceiling or wall expanses in interior drywall
systems is called a(n Correct Answer-Expansion joint
The three types of reinforcing tape for drywall use are paper, metal edge,
and Correct Answer-Fiberglass mesh
A type of trim that can be used as an edging or border on an arched
opening is Correct Answer-Reveal trim
One disadvantage of using premix compound is that it must be kept from
Correct Answer-Freezing
