Saca/Amatrol Test Prep Study Guide with Complete Solutions

Saca/Amatrol Test Prep Study Guide with Complete Solutions is the flow of electrons in a conductor - Answer️️ -electicity In (blank) Theory current flow, current flows from positive to negative - Answer️️ -conventional a (Blank) uses a tiny neon bulb that glows when current flows through it - Answer️️ -circut tester the flow of electricity in one direction is called (Blank) current - Answer️️ -DC Most of the electrical power in the world is called (Blank) - Answer️️ -AC a common input devise is (Blank) - Answer️️ -switch An output devise is also called - Answer️️ -load an electrical (Blank) diagram uses a standard symbol to show components of a circuit and how they are connected - Answer️️ -Schematic a power supply's feature to supply constant current or voltage is called (Blank) - Answer️️ -regulation a battery depends on a (Blank) reaction to produce electricity - Answer️️ - chemical ©SOPHIABENNETT@ Monday, August 26, 2024 6:09 AM 2 a simple method for opening a closing a circuit is to use a (Blank) - Answer️️ -switch the two main components of a switch is the (Blank) and contacts - Answer️️ -operator the two basic category's of a switch are manual and (Blank) - Answer️️ - automatic a (Normally) (Blank) contact allows current to flow when the switches operators not activated - Answer️️ -normally closed a (Blank) switch operator rotates the bar down to connect witch the second terminal, completing the circuit - Answer️️ -knife a (Blank) is an output devise that gives off light - Answer️️ -lamp a (Blank) is an output devise that produces mechanical liner motion - Answer️️ -solenoid a (Blank) is an output devise that produces sound - Answer️️ -buzzer a (Blank) is an output device that has a magnetic field that causes the shaft to start rotating - Answer️️ -motor a (Blank) is an output devise made of a material that does not allow current to easily flow through it. - Answer️️ -resistor ©SOPHIABENNETT@ Monday, August 26, 2024 6:09 AM 3 (Blank) (Blank) is the existence of a potential difference between two points of the circuit - Answer️️ -electromotive force Electromotive Force is measured in (Blank) - Answer️️ -volts a (Blank) is a device that measures the voltage between two points in a electrical circuit - Answer️️ -voltmeter The measurements readings of a (Blank) are much easier to read the a analog multimeter - Answer️️ -DMM the black lead from the negative (common) terminal of the DMM should be connected to point with the (Blank) potential in the circuit - Answer️️