TTT1 written Exam Questions & Answers
If the wire rope load on a base mounted Who is has a breaking strength of
20,500 pounds what is the actual working load limit? Correct Answer-4,100
The bridals slings on the pole perform work function? Correct Answer-
Supports the pole vertically and carries all the horizontal load.
if the wire rope load line on a base mounted hoist has a breaking strength of
21,500lbs what is the actual working load limit when lifting personnel.
Correct Answer-2,150lbs.
when is a trained designated person necessary when lifting a load with a crane?
Correct Answer-When a crane can not physically enter a power line restricted
area.
which of these terms identifies a self support tower component? Correct
Answer-Horizontal member.
The cantilever is the distance between the bridal slings and a rooster has
sheave. Correct Answer-True.
, TTT1 written Exam Questions & Answers
When calculating a fall distance using a 6 foot energy absorber what is the
maximum pull out distance Correct Answer-4 ft.
what minimum force must a non-engineered anchor be able to withstand for fall
protection use? Correct Answer-5,000lbs.
The two methods of measuring guy wire tensioner are? Correct Answer-
Direct and Indirect.
where should I coax ground to be placed vertically in relation to the hoist grip?
Correct Answer-above it.
what is the correct procedure for installing bolts in members of leg splices?
Correct Answer-Up and out
an overhaul ball provides work function and operations? Correct Answer-
provides weight allowing the load line to return to the ground.
The best synthetic rope material to use for overhead lifting is? Correct
Answer-polyester.
If the wire rope load on a base mounted Who is has a breaking strength of
20,500 pounds what is the actual working load limit? Correct Answer-4,100
The bridals slings on the pole perform work function? Correct Answer-
Supports the pole vertically and carries all the horizontal load.
if the wire rope load line on a base mounted hoist has a breaking strength of
21,500lbs what is the actual working load limit when lifting personnel.
Correct Answer-2,150lbs.
when is a trained designated person necessary when lifting a load with a crane?
Correct Answer-When a crane can not physically enter a power line restricted
area.
which of these terms identifies a self support tower component? Correct
Answer-Horizontal member.
The cantilever is the distance between the bridal slings and a rooster has
sheave. Correct Answer-True.
, TTT1 written Exam Questions & Answers
When calculating a fall distance using a 6 foot energy absorber what is the
maximum pull out distance Correct Answer-4 ft.
what minimum force must a non-engineered anchor be able to withstand for fall
protection use? Correct Answer-5,000lbs.
The two methods of measuring guy wire tensioner are? Correct Answer-
Direct and Indirect.
where should I coax ground to be placed vertically in relation to the hoist grip?
Correct Answer-above it.
what is the correct procedure for installing bolts in members of leg splices?
Correct Answer-Up and out
an overhaul ball provides work function and operations? Correct Answer-
provides weight allowing the load line to return to the ground.
The best synthetic rope material to use for overhead lifting is? Correct
Answer-polyester.
