Builders License Test 2 |Questions with
100% Correct Answers
What is the minimum number of coats of Portland plaster applied on the exterior
or masonry? - ANSWER 2
What is the minimum engagement of wall tie embedment in solid masonry units? -
ANSWER 1 1/2
When installing brick in a wall, what is the preferred type of flashing used behind
the brick? - ANSWER Copper
Which of the following is not acceptable as proof of legal right to work in the U.S.? -
ANSWER Bank or Credit Card plus Social Security Card
Firebrick walls which line the interior of a fireplace must be laid using refractory cement
with joints that are no more than _____ thick. - ANSWER 1/4"
_______ is a filler product with a high water content. - ANSWER grout
The temperature of new concrete should not fall below _____ F during the curing
period. - ANSWER 50
, Cindy needs to do some repair work to her home before putting it on the market. She
needs mortar to fill in a few unsightly cracks in her patio, but is unsure which type to get.
Given the information provided, which of these would be her best option? - ANSWER
Type N
When installing a suspended (or drop) ceiling, the top edges of the grid system
supporting the false ceiling must be at least ________ below the bottom of the
ceiling framing. - ANSWER 3"
What kind of brush should you use to paint window trim? - ANSWER 1 1/2" sash brush
A woods ability to accept a finish is determined by all of these EXCEPT - ANSWER
color
Which of these is not a possible penalty for failing to provide workers' compensation
coverage? - ANSWER The employers license is revoked and the employer is unable to
do contracting work.
When self-insuring, accident insurance can be ab alternative to ______. - ANSWER
Workers' compensation insurance
Builders risk Insurance protects the contractor against - ANSWER Any loss or damage
to the project, structure and materials purchased for the project.
100% Correct Answers
What is the minimum number of coats of Portland plaster applied on the exterior
or masonry? - ANSWER 2
What is the minimum engagement of wall tie embedment in solid masonry units? -
ANSWER 1 1/2
When installing brick in a wall, what is the preferred type of flashing used behind
the brick? - ANSWER Copper
Which of the following is not acceptable as proof of legal right to work in the U.S.? -
ANSWER Bank or Credit Card plus Social Security Card
Firebrick walls which line the interior of a fireplace must be laid using refractory cement
with joints that are no more than _____ thick. - ANSWER 1/4"
_______ is a filler product with a high water content. - ANSWER grout
The temperature of new concrete should not fall below _____ F during the curing
period. - ANSWER 50
, Cindy needs to do some repair work to her home before putting it on the market. She
needs mortar to fill in a few unsightly cracks in her patio, but is unsure which type to get.
Given the information provided, which of these would be her best option? - ANSWER
Type N
When installing a suspended (or drop) ceiling, the top edges of the grid system
supporting the false ceiling must be at least ________ below the bottom of the
ceiling framing. - ANSWER 3"
What kind of brush should you use to paint window trim? - ANSWER 1 1/2" sash brush
A woods ability to accept a finish is determined by all of these EXCEPT - ANSWER
color
Which of these is not a possible penalty for failing to provide workers' compensation
coverage? - ANSWER The employers license is revoked and the employer is unable to
do contracting work.
When self-insuring, accident insurance can be ab alternative to ______. - ANSWER
Workers' compensation insurance
Builders risk Insurance protects the contractor against - ANSWER Any loss or damage
to the project, structure and materials purchased for the project.
