BICSI Practice Test-RETAKE UPDATED
Exam Questions and CORRECT Answers
The 2 main considerations concerning the existing cabling are? - Correct Answer-
Grandfathered system
Abandoned cable 11-25
The type of cutover where cross-connects are relocated one pair after another until completed
is called a - Correct Answer- rolling cut 11-28
Which practice involves moving the customer to a temporary office space until their section
of the retrofit is completed and then moving them back to their recabled office space? -
Correct Answer- Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the presence of
light? - Correct Answer- Fiber strand identifier 11-11
A ______ provides a quick graphical representation of how the circuit is layed out? - Correct
Answer- CLR 11-27
A ______ uses several pluggable modules to locate and Identify cables. - Correct Answer-
Office locator kit
A _________ injects light (at a proper wavelength) and measures the results t the other end. -
Correct Answer- Light source and power meter
A ________ detects the presence of light within a fiber strand - Correct Answer- Fiber strand
identifier
A _______ uses a laser to identify fiber strands and find breaks in the fiber at the near end. -
Correct Answer- Visual fault locator
, A________ will leave the customer momentarily without communications - Correct Answer-
Hot-cut 11-28
During a _______, cross-connects are relocated one pair after another until completed. -
Correct Answer- Rolling cut
*_________ is a property of an electromagnetic field built around a conductor that opposes
any changes in current flow in a circuit. - Correct Answer- Inductance
____________ is a property of conductors that allows storage of electrical charges when
potential differences (voltages) exist between the conductors. - Correct Answer- Capacitance
*In AC circuits, the total opposition to current flow is called _________, which is measured
in ohms. - Correct Answer- Impedance
The nominal characteristic impedance of balanced twisted pair cable is _______ ohms at 100
MHz - Correct Answer- 100
Pair 626 would be in the __________ Super Binder - Correct Answer- Red
Series ______ is the preferred choice for longer runs - Correct Answer- 11
The _________ connector/s have center pins (choose all that apply) - Correct Answer- N
BNC
The way in which others perceive an employee can be divided into 3 distinct areas: body
language, Tone of voice and choice of words. Which of the 3 makes the biggest impression? -
Correct Answer- Body language - 55%
The range of human hearing is from _________ - Correct Answer- 20 Hz- 20,000 Hz
An increase of _______ will result in a doubling or halving of the power. - Correct Answer- 3
dB
Exam Questions and CORRECT Answers
The 2 main considerations concerning the existing cabling are? - Correct Answer-
Grandfathered system
Abandoned cable 11-25
The type of cutover where cross-connects are relocated one pair after another until completed
is called a - Correct Answer- rolling cut 11-28
Which practice involves moving the customer to a temporary office space until their section
of the retrofit is completed and then moving them back to their recabled office space? -
Correct Answer- Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the presence of
light? - Correct Answer- Fiber strand identifier 11-11
A ______ provides a quick graphical representation of how the circuit is layed out? - Correct
Answer- CLR 11-27
A ______ uses several pluggable modules to locate and Identify cables. - Correct Answer-
Office locator kit
A _________ injects light (at a proper wavelength) and measures the results t the other end. -
Correct Answer- Light source and power meter
A ________ detects the presence of light within a fiber strand - Correct Answer- Fiber strand
identifier
A _______ uses a laser to identify fiber strands and find breaks in the fiber at the near end. -
Correct Answer- Visual fault locator
, A________ will leave the customer momentarily without communications - Correct Answer-
Hot-cut 11-28
During a _______, cross-connects are relocated one pair after another until completed. -
Correct Answer- Rolling cut
*_________ is a property of an electromagnetic field built around a conductor that opposes
any changes in current flow in a circuit. - Correct Answer- Inductance
____________ is a property of conductors that allows storage of electrical charges when
potential differences (voltages) exist between the conductors. - Correct Answer- Capacitance
*In AC circuits, the total opposition to current flow is called _________, which is measured
in ohms. - Correct Answer- Impedance
The nominal characteristic impedance of balanced twisted pair cable is _______ ohms at 100
MHz - Correct Answer- 100
Pair 626 would be in the __________ Super Binder - Correct Answer- Red
Series ______ is the preferred choice for longer runs - Correct Answer- 11
The _________ connector/s have center pins (choose all that apply) - Correct Answer- N
BNC
The way in which others perceive an employee can be divided into 3 distinct areas: body
language, Tone of voice and choice of words. Which of the 3 makes the biggest impression? -
Correct Answer- Body language - 55%
The range of human hearing is from _________ - Correct Answer- 20 Hz- 20,000 Hz
An increase of _______ will result in a doubling or halving of the power. - Correct Answer- 3
dB
