Network Pro chapter 9 | Questions And Answers Latest {2024- 2025} A+ Graded | 100%
Verified
You are in the process of configuring an iSCSI storage area network (SAN) for your network.... Which tool
should you use? - iSCSI Initiator
Arrange the Fibre Channel SAN implementations tasks in the order they should be performed. - Step 1-
Install a Fibre Channel adapter in each server that will access the shared storage on the SAN.
Step 2- Deploy a Fibre Channel switch.
Step 3- Connect each server to the Fibre Channel switch using the appropriate fiber optic cabling for the
equipment you are using.
Step 4- Deploy a shared storage device, such as an external RAID device containing multiple hard disk
drives.
Which of the following does NOT accurately describe an iSCSI SAN? - Requires special hardware and
knowledge to implement.
You manage a network with three dedicated storage devices, as shown in the diagram. Users on the
network see only a single file server. Which network-based storage technology is being used? - NAS with
Clustering.
In a SAN implementation, the servers that connect to shared storage devices are
called___________________. - initiators
Which of the following are typical components of a NAS device? select two - A minimal network OS.
One or more NICs.
Which of the following protocols are used with VoIP? - SIP
RTP
Which of the following protocols are used by VoIP to set up, maintain, and terminate a phone call? - SIP
, Which switch features are typically used with VoIP? - PoE
VLAN
Which of the following features is used with digital IP phones to supply power through a switch port? -
PoE
Match each UC component on the left with its corresponding definition on the right. - UC Server -
Manages the entire UC system
UC Gateway - Connects a digital network to an analog network
UC Server - Makes presence information available to users
UC Hardware Device - An IP phone for making phone calls
UC Gateway - Connects a UC network to the PSTN
UC Software Device - A smart phone used to access the UC system
UC Hardware Device - Designed to work specifically with the UC server
Your company uses VoIP for phone calls. Recently, employees have been complaining about phone calls
with unusual sound effects. Which type of problem is occurring on the VoIP system? - Jitter
At what percent is packet loss noticeable in voice traffic? - 1%
Which protocol doies VoIP use to interface with the PSTN? - MGCP
Your company recently installed a unified communication system. Employees are now able to inform
each other of their availability. - Presence information
You've been asked by upper management if there is a way to integrate phone calls, emails, and instant
messaging into a single platform. Which of the following systems should you recommend to them? -
Unified communication
Which of the following protocols is used during the call control process of multimedia communications?
- Session Initiation Protocol
Verified
You are in the process of configuring an iSCSI storage area network (SAN) for your network.... Which tool
should you use? - iSCSI Initiator
Arrange the Fibre Channel SAN implementations tasks in the order they should be performed. - Step 1-
Install a Fibre Channel adapter in each server that will access the shared storage on the SAN.
Step 2- Deploy a Fibre Channel switch.
Step 3- Connect each server to the Fibre Channel switch using the appropriate fiber optic cabling for the
equipment you are using.
Step 4- Deploy a shared storage device, such as an external RAID device containing multiple hard disk
drives.
Which of the following does NOT accurately describe an iSCSI SAN? - Requires special hardware and
knowledge to implement.
You manage a network with three dedicated storage devices, as shown in the diagram. Users on the
network see only a single file server. Which network-based storage technology is being used? - NAS with
Clustering.
In a SAN implementation, the servers that connect to shared storage devices are
called___________________. - initiators
Which of the following are typical components of a NAS device? select two - A minimal network OS.
One or more NICs.
Which of the following protocols are used with VoIP? - SIP
RTP
Which of the following protocols are used by VoIP to set up, maintain, and terminate a phone call? - SIP
, Which switch features are typically used with VoIP? - PoE
VLAN
Which of the following features is used with digital IP phones to supply power through a switch port? -
PoE
Match each UC component on the left with its corresponding definition on the right. - UC Server -
Manages the entire UC system
UC Gateway - Connects a digital network to an analog network
UC Server - Makes presence information available to users
UC Hardware Device - An IP phone for making phone calls
UC Gateway - Connects a UC network to the PSTN
UC Software Device - A smart phone used to access the UC system
UC Hardware Device - Designed to work specifically with the UC server
Your company uses VoIP for phone calls. Recently, employees have been complaining about phone calls
with unusual sound effects. Which type of problem is occurring on the VoIP system? - Jitter
At what percent is packet loss noticeable in voice traffic? - 1%
Which protocol doies VoIP use to interface with the PSTN? - MGCP
Your company recently installed a unified communication system. Employees are now able to inform
each other of their availability. - Presence information
You've been asked by upper management if there is a way to integrate phone calls, emails, and instant
messaging into a single platform. Which of the following systems should you recommend to them? -
Unified communication
Which of the following protocols is used during the call control process of multimedia communications?
- Session Initiation Protocol
