Autocad 2d final Exam; Questions & Answers
100% Pass
The Initial Start Window CORRECT ANSWER-What is the quickest way of plotting a full
sheet set to a DWF file?
The Initial Start window CORRECT ANSWER-What displays when you click the Start tab in
the File Tabs bar?
Press <Esc> CORRECT ANSWER-How do you cancel a command using the keyboard?
Press <Enter> CORRECT ANSWER-What is the quickest way to repeat a command?
True CORRECT ANSWER-T or F: To display a specific ribbon panel, you can right-click on
the ribbon and select the required panel in the shortcut menu.
X value, Y value CORRECT ANSWER-How are points specified in the AutoCAD Cartesian
workspace?
It displays a * next to its name in the FileTabs Bar CORRECT ANSWER-How do you know
if a file has not been saved after it is modified?
-By pressing <Ctrl> + <Tab>
-By selecting the required drawing file tab in the Filetabs bar. CORRECT ANSWER-How
can you switch between the open drawings? (2 answers)
, Autocad 2d final Exam; Questions & Answers
100% Pass
Double click the mouse wheel CORRECT ANSWER-How do you fit the entire drawing in
the drawing window?
Press <Enter> CORRECT ANSWER-When using the Line command, how do you exit the
command once you have finished drawing line segments?
False CORRECT ANSWER-T or F: When drawing a line using the Line command, you can
specify its length, but not its angle.
-With Polar Tracking on, a dotted tracking line displars when the cursor is at a specified angle
location
-Ortho Mode enables you to draw lines horizontally and vertically only. CORRECT
ANSWER-True statements about Polar Tracking and Ortho Mode
Toggle on Ortho Mode CORRECT ANSWER-What is the best method to draw a perfectly
horizontal line using Line command?
Click the first corner of the rectangle and then click the diagonally opposite corner.
CORRECT ANSWER-How do you draw a rectangle using the Rectangle Command?
Tan, Tan, Point CORRECT ANSWER-Which one of the following is NOT a method for
drawing circles with the Circle command?
, Autocad 2d final Exam; Questions & Answers
100% Pass
Available when you need to pick a point. CORRECT ANSWER-When you set Object Snap
options in the Drafting Settings dialog box, the object snaps are:
Circles and arcs CORRECT ANSWER-What types of objects does the Center object snap
work with?
Geometric Center Object Snap CORRECT ANSWER-Which tool enables you to position an
object at the exact center of a rectangle that was created using the Rectangle command?
When you start a command and the software prompts you for a point CORRECT
ANSWER-When can you use an Object Snap override from the shortcut menu?
True CORRECT ANSWER-T or F: If you set the Polar Tracking increment angles to 18, 36,
54... you can track to the multiples of 18 degrees in addition to horizontal and vertical lines.
Object Snap Tracking and Object Snap CORRECT ANSWER-Which settings in the Status
Bar should be toggled on to use the Object Snap Tracking?
It forces the cursor to always snap to the snap grid, even if you are not in an active command.
CORRECT ANSWER-What happens when you type Snap in the Command Line, select
Legacy, and then select Yes to toggle it on?
, Autocad 2d final Exam; Questions & Answers
100% Pass
Window selects everything inside and Crossing selects everything inside or touching the
selection box. CORRECT ANSWER-What is the difference between a Window and a
Crossing selection box?
Hold <Shift> and pick the object. CORRECT ANSWER-How can you clear a selected
object?
They highlight in blue with a thicker line weight and contain blue squares. CORRECT
ANSWER-What happens to objects when you select them before starting any command?
False CORRECT ANSWER-T or F: The Move, Copy, Rotate, and Scale commands use a base
point, which is always the center or a midpoint of an object.
The original objects fade to gray and the new objects maintain their original properties.
CORRECT ANSWER-What happens to the selected objects in the active Rotate command?
0.5 CORRECT ANSWER-Which Scale Factor should you use to make an object half of its
current size?
Press <Enter> CORRECT ANSWER-When selecting objects for a command, such as Move
or Copy, how do you end the object selection?
100% Pass
The Initial Start Window CORRECT ANSWER-What is the quickest way of plotting a full
sheet set to a DWF file?
The Initial Start window CORRECT ANSWER-What displays when you click the Start tab in
the File Tabs bar?
Press <Esc> CORRECT ANSWER-How do you cancel a command using the keyboard?
Press <Enter> CORRECT ANSWER-What is the quickest way to repeat a command?
True CORRECT ANSWER-T or F: To display a specific ribbon panel, you can right-click on
the ribbon and select the required panel in the shortcut menu.
X value, Y value CORRECT ANSWER-How are points specified in the AutoCAD Cartesian
workspace?
It displays a * next to its name in the FileTabs Bar CORRECT ANSWER-How do you know
if a file has not been saved after it is modified?
-By pressing <Ctrl> + <Tab>
-By selecting the required drawing file tab in the Filetabs bar. CORRECT ANSWER-How
can you switch between the open drawings? (2 answers)
, Autocad 2d final Exam; Questions & Answers
100% Pass
Double click the mouse wheel CORRECT ANSWER-How do you fit the entire drawing in
the drawing window?
Press <Enter> CORRECT ANSWER-When using the Line command, how do you exit the
command once you have finished drawing line segments?
False CORRECT ANSWER-T or F: When drawing a line using the Line command, you can
specify its length, but not its angle.
-With Polar Tracking on, a dotted tracking line displars when the cursor is at a specified angle
location
-Ortho Mode enables you to draw lines horizontally and vertically only. CORRECT
ANSWER-True statements about Polar Tracking and Ortho Mode
Toggle on Ortho Mode CORRECT ANSWER-What is the best method to draw a perfectly
horizontal line using Line command?
Click the first corner of the rectangle and then click the diagonally opposite corner.
CORRECT ANSWER-How do you draw a rectangle using the Rectangle Command?
Tan, Tan, Point CORRECT ANSWER-Which one of the following is NOT a method for
drawing circles with the Circle command?
, Autocad 2d final Exam; Questions & Answers
100% Pass
Available when you need to pick a point. CORRECT ANSWER-When you set Object Snap
options in the Drafting Settings dialog box, the object snaps are:
Circles and arcs CORRECT ANSWER-What types of objects does the Center object snap
work with?
Geometric Center Object Snap CORRECT ANSWER-Which tool enables you to position an
object at the exact center of a rectangle that was created using the Rectangle command?
When you start a command and the software prompts you for a point CORRECT
ANSWER-When can you use an Object Snap override from the shortcut menu?
True CORRECT ANSWER-T or F: If you set the Polar Tracking increment angles to 18, 36,
54... you can track to the multiples of 18 degrees in addition to horizontal and vertical lines.
Object Snap Tracking and Object Snap CORRECT ANSWER-Which settings in the Status
Bar should be toggled on to use the Object Snap Tracking?
It forces the cursor to always snap to the snap grid, even if you are not in an active command.
CORRECT ANSWER-What happens when you type Snap in the Command Line, select
Legacy, and then select Yes to toggle it on?
, Autocad 2d final Exam; Questions & Answers
100% Pass
Window selects everything inside and Crossing selects everything inside or touching the
selection box. CORRECT ANSWER-What is the difference between a Window and a
Crossing selection box?
Hold <Shift> and pick the object. CORRECT ANSWER-How can you clear a selected
object?
They highlight in blue with a thicker line weight and contain blue squares. CORRECT
ANSWER-What happens to objects when you select them before starting any command?
False CORRECT ANSWER-T or F: The Move, Copy, Rotate, and Scale commands use a base
point, which is always the center or a midpoint of an object.
The original objects fade to gray and the new objects maintain their original properties.
CORRECT ANSWER-What happens to the selected objects in the active Rotate command?
0.5 CORRECT ANSWER-Which Scale Factor should you use to make an object half of its
current size?
Press <Enter> CORRECT ANSWER-When selecting objects for a command, such as Move
or Copy, how do you end the object selection?
