CDFA Measurement Verification Questions with
Complete Solutions 100% Verified
Define accurate Correct answer-a piece pf equipment is "accurate" when its performance
or value conforms to the standard within applicable tolerances and other performance
requirements.
"accurate" dos not mean "correct"
What is the Statute of Limitations on a misdemeanor Correct answer-1 year
What do you apply tolerances to when testing retail motor fuel Correct answer-each
draft
What is a maintenance tolerance on a full load test Correct answer-2%
What is the practical unit of electrical resistance Correct answer-ohm
The rotor or indicator for a meter shall rotate or increment continuously when a load is applied
equally to _________? Correct answer-0.5 ampere
Handbook 44
Appendix C - General Tables of Units of Measurement Correct answer-1 oz
1 gill
1 pint
1 quart
, CDFA Measurement Verification Questions with
Complete Solutions 100% Verified
1 gallon
1 cubic inch
1 cubic foot
1 milliliter
1 liter
In testing a vehicle tank meter, the minimum test draft for a "normal" test shall be _______?
Correct answer-The amount delivered in one minute at max flow or 50 gallons,
whichever is more
Meter indicating more than actual delivery... Correct answer-under - registration
A meter indication less than actual delivery Correct answer-over - registration
Testing on animal euthanistic devices should occur in what frequency Correct answer-
semiannually (every 6 months)
The smallest unit allowed on a wholesale LPG device is Correct answer-1 gallon or 1 liter
The smallest unit allowed on retail LPG devices is Correct answer-1/10 of a gallon or liter
Sale of LPG in amounts over 5 gal is by Correct answer-either weight or volume
Complete Solutions 100% Verified
Define accurate Correct answer-a piece pf equipment is "accurate" when its performance
or value conforms to the standard within applicable tolerances and other performance
requirements.
"accurate" dos not mean "correct"
What is the Statute of Limitations on a misdemeanor Correct answer-1 year
What do you apply tolerances to when testing retail motor fuel Correct answer-each
draft
What is a maintenance tolerance on a full load test Correct answer-2%
What is the practical unit of electrical resistance Correct answer-ohm
The rotor or indicator for a meter shall rotate or increment continuously when a load is applied
equally to _________? Correct answer-0.5 ampere
Handbook 44
Appendix C - General Tables of Units of Measurement Correct answer-1 oz
1 gill
1 pint
1 quart
, CDFA Measurement Verification Questions with
Complete Solutions 100% Verified
1 gallon
1 cubic inch
1 cubic foot
1 milliliter
1 liter
In testing a vehicle tank meter, the minimum test draft for a "normal" test shall be _______?
Correct answer-The amount delivered in one minute at max flow or 50 gallons,
whichever is more
Meter indicating more than actual delivery... Correct answer-under - registration
A meter indication less than actual delivery Correct answer-over - registration
Testing on animal euthanistic devices should occur in what frequency Correct answer-
semiannually (every 6 months)
The smallest unit allowed on a wholesale LPG device is Correct answer-1 gallon or 1 liter
The smallest unit allowed on retail LPG devices is Correct answer-1/10 of a gallon or liter
Sale of LPG in amounts over 5 gal is by Correct answer-either weight or volume
