AutoCAD Test 1 Questions and Answers
Graded A+
What is the purpose of the `LINE` command in AutoCAD?
✔✔The `LINE` command is used to draw straight segments between two or more points in a
drawing. It allows users to create precise linear elements by specifying the start and end points of
each line segment.
How do you use the `CIRCLE` command to draw a circle in AutoCAD?
✔✔To draw a circle, use the `CIRCLE` command and specify the center point and radius. You
can also use the `CIRCLE` command to draw a circle by defining the center point and a point on
the circumference.
What function does the `OFFSET` command perform, and how is it applied?
✔✔The `OFFSET` command creates parallel copies of objects at a specified distance. Select the
object to offset, enter the desired distance, and place the new copy. This is useful for creating
parallel lines or maintaining consistent spacing.
How do you employ the `ERASE` command to remove elements from a drawing?
1
, ✔✔The `ERASE` command removes selected objects from the drawing. Activate the command,
select the objects you want to delete, and press Enter to erase them. This helps in cleaning up
unwanted or redundant elements.
What is the purpose of the `UNITS` command, and how do you set it up?
✔✔The `UNITS` command sets the measurement units for the drawing, such as inches or
millimeters. Use this command to define the type of units and precision for length, angle, and
area measurements in your drawing.
How do you use the `TRIM` command to modify intersecting lines?
✔✔The `TRIM` command trims parts of objects that intersect with a cutting edge. Select the
cutting edge first, then choose the portions of objects to trim. This helps in removing excess
segments and refining the drawing.
What is the `HATCH` command used for in AutoCAD, and how can you apply it?
✔✔The `HATCH` command fills a closed area with a pattern or solid fill. To apply a hatch,
select the boundary of the area, choose a hatch pattern or solid fill, and adjust properties like
scale and angle as needed.
How can you use the `DIMLINEAR` command to add dimensions to a drawing?
2
Graded A+
What is the purpose of the `LINE` command in AutoCAD?
✔✔The `LINE` command is used to draw straight segments between two or more points in a
drawing. It allows users to create precise linear elements by specifying the start and end points of
each line segment.
How do you use the `CIRCLE` command to draw a circle in AutoCAD?
✔✔To draw a circle, use the `CIRCLE` command and specify the center point and radius. You
can also use the `CIRCLE` command to draw a circle by defining the center point and a point on
the circumference.
What function does the `OFFSET` command perform, and how is it applied?
✔✔The `OFFSET` command creates parallel copies of objects at a specified distance. Select the
object to offset, enter the desired distance, and place the new copy. This is useful for creating
parallel lines or maintaining consistent spacing.
How do you employ the `ERASE` command to remove elements from a drawing?
1
, ✔✔The `ERASE` command removes selected objects from the drawing. Activate the command,
select the objects you want to delete, and press Enter to erase them. This helps in cleaning up
unwanted or redundant elements.
What is the purpose of the `UNITS` command, and how do you set it up?
✔✔The `UNITS` command sets the measurement units for the drawing, such as inches or
millimeters. Use this command to define the type of units and precision for length, angle, and
area measurements in your drawing.
How do you use the `TRIM` command to modify intersecting lines?
✔✔The `TRIM` command trims parts of objects that intersect with a cutting edge. Select the
cutting edge first, then choose the portions of objects to trim. This helps in removing excess
segments and refining the drawing.
What is the `HATCH` command used for in AutoCAD, and how can you apply it?
✔✔The `HATCH` command fills a closed area with a pattern or solid fill. To apply a hatch,
select the boundary of the area, choose a hatch pattern or solid fill, and adjust properties like
scale and angle as needed.
How can you use the `DIMLINEAR` command to add dimensions to a drawing?
2
