ipc j-std-001G exam questions and
answers
Conductor Diameter - Answer -The conductor diameter is the outside diameter of wire,
either stranded or solid, without the insulation
Wire Diameter - Answer -he wire diameter is the outside diameter of wire, either
stranded or solid, including insulation if present
Disposition - Answer -The determination of how defects should be treated. Dispositions
include, but are not limited to, rework, use as is, scrap or repair.
Electrical Clearance - Answer -The minimum spacing between noncommon uninsulated
conductors, e.g., patterns, materials, hardware, residue, is referre<;l to as "minimum
electrical clearance" throughout this document and is defined in the applicable design
standard or on the approved or controlled documentation. In the absence of a known
design standard use Appendix B (derived from IPC-2221).
FOD (Foreign Object Debris) - Answer -A generic term for a substance, debris,
particulate matter or article alien to the assembly or system.
High Volatage - Answer -The term "high voltage" will vary by design and application.
The high voltage criteria in this document are only applicable when specifically required
in the drawings/procurement documentation.
Manufacturer (Assembler) - Answer -The individual, organization, or company
responsible for the assembly process and verification operations necessary to ensure
full compliance of assemblies to this Standard.
Objective Evidence - Answer -Documentation in the form of hard copy, computer data,
video, or other media that demonstrates the requirements in the Standard have been
met (for examples, see Appendix C).
Process Control - Answer -A system or method to continually steer an operation in
reducing variation in the processes or products to meet or exceed the goal in quality
and performance.
Proficiency - Answer -The capability to perform tasks in accordance with the
requirements and verification procedures detailed in this Standard.
answers
Conductor Diameter - Answer -The conductor diameter is the outside diameter of wire,
either stranded or solid, without the insulation
Wire Diameter - Answer -he wire diameter is the outside diameter of wire, either
stranded or solid, including insulation if present
Disposition - Answer -The determination of how defects should be treated. Dispositions
include, but are not limited to, rework, use as is, scrap or repair.
Electrical Clearance - Answer -The minimum spacing between noncommon uninsulated
conductors, e.g., patterns, materials, hardware, residue, is referre<;l to as "minimum
electrical clearance" throughout this document and is defined in the applicable design
standard or on the approved or controlled documentation. In the absence of a known
design standard use Appendix B (derived from IPC-2221).
FOD (Foreign Object Debris) - Answer -A generic term for a substance, debris,
particulate matter or article alien to the assembly or system.
High Volatage - Answer -The term "high voltage" will vary by design and application.
The high voltage criteria in this document are only applicable when specifically required
in the drawings/procurement documentation.
Manufacturer (Assembler) - Answer -The individual, organization, or company
responsible for the assembly process and verification operations necessary to ensure
full compliance of assemblies to this Standard.
Objective Evidence - Answer -Documentation in the form of hard copy, computer data,
video, or other media that demonstrates the requirements in the Standard have been
met (for examples, see Appendix C).
Process Control - Answer -A system or method to continually steer an operation in
reducing variation in the processes or products to meet or exceed the goal in quality
and performance.
Proficiency - Answer -The capability to perform tasks in accordance with the
requirements and verification procedures detailed in this Standard.
