1 /181B Hoisting Prep Questions And Answers
1. manufacturer's specification: all hoisting machinery shall be operated in accor- dance with the:
2. inoperable and secure: maintenance repair and refueling shall be done when the machine is:
3. daily: visual inspection shall be made of wire ropes, bearings, gears, friction clutches, brakes, chain drives and other parts subject to wear on all hoisting machinery to ensure against development of unsafe conditions
4. 2: factory of safety. all parts of the crane and supports shall be designed, main- tained, and constructed to withstand all stresses resulting from intended use with a safety factor of not less than:
5. exceed: wind speed must not manufacturer's recommendations for continued work operations.
6. chocked or blocked: when the pile driver is not in use, the 2 /18hammer shall be in the leads or lowered to the ground
7.determine load weight before attempting any lift: the single most important precaution in rigging and hoisting is to:
8.defective components, failure to destroy defective components, using un- safe equipment, hazardous wind conditions, hazardous weather conditions, electrical contact, hoist line not plumb: common hoisting and rigging hazards include:
9.use a shackle: whenever 2 or more rigging ropes or straps are to be placed over a hook
10.A) rig loads to prevent any parts from shifting or dislodging during the lift
B)keep the load under control at all times with taglines
C)never wrap the hoist rope around the load
D)the load line should be brought over the load's center of gravity before the lift is started
E)make sure that everyone stands clear when loads are being lifted, lowered, and freed of slings
**CORRECT ANSWER**
F)all the above: when rigging, lifting and landing loads: 3 /1811.Mass. Dept. of Public Safety within one hour: in the event of death occurring in which hoist equipment is involved, who must be notified
12.more than 500lbs.; higher than 10 feet; bucket can handle more thand 1/4 yard of materials: according to chapter 146 what type of equipment requires a license to operate
13.wheel or track excavating equipment including all 2B & 2C equipment: what type of equipment can your run with a 2A License
1. manufacturer's specification: all hoisting machinery shall be operated in accor- dance with the:
2. inoperable and secure: maintenance repair and refueling shall be done when the machine is:
3. daily: visual inspection shall be made of wire ropes, bearings, gears, friction clutches, brakes, chain drives and other parts subject to wear on all hoisting machinery to ensure against development of unsafe conditions
4. 2: factory of safety. all parts of the crane and supports shall be designed, main- tained, and constructed to withstand all stresses resulting from intended use with a safety factor of not less than:
5. exceed: wind speed must not manufacturer's recommendations for continued work operations.
6. chocked or blocked: when the pile driver is not in use, the 2 /18hammer shall be in the leads or lowered to the ground
7.determine load weight before attempting any lift: the single most important precaution in rigging and hoisting is to:
8.defective components, failure to destroy defective components, using un- safe equipment, hazardous wind conditions, hazardous weather conditions, electrical contact, hoist line not plumb: common hoisting and rigging hazards include:
9.use a shackle: whenever 2 or more rigging ropes or straps are to be placed over a hook
10.A) rig loads to prevent any parts from shifting or dislodging during the lift
B)keep the load under control at all times with taglines
C)never wrap the hoist rope around the load
D)the load line should be brought over the load's center of gravity before the lift is started
E)make sure that everyone stands clear when loads are being lifted, lowered, and freed of slings
**CORRECT ANSWER**
F)all the above: when rigging, lifting and landing loads: 3 /1811.Mass. Dept. of Public Safety within one hour: in the event of death occurring in which hoist equipment is involved, who must be notified
12.more than 500lbs.; higher than 10 feet; bucket can handle more thand 1/4 yard of materials: according to chapter 146 what type of equipment requires a license to operate
13.wheel or track excavating equipment including all 2B & 2C equipment: what type of equipment can your run with a 2A License
