CM 1011 OSHA SAFETY
Compliance with quality requirements often equates to compliance with _________________
requirements - ANS-safety
PMs and superintendents set the standards and are responsible for the - ANS-overall safety of
their workers on the job site and all of the materials and machines they must handle
Construction accounts for little more than 20% of what? - ANS-all occupational fatalities
OSHA (occupational safety and health administration) - ANS-the federal agency charged with
developing safety standards and enforcing them through inspection for construction and all
other industries in the U.S.
No construction project should start until a well thought out ___________________ is in place. -
ANS-safety plan
The #1 goal of the safety plan is to - ANS-mitigate hazards and prevent accidents
An effective management plan includes four primary components: - ANS-1. management
commitment
2. job site analysis
3. hazard prevention and control
4. safety and health training
Superintendents set strict rules and must make sure that every one that enters the job site is
provided and wearing the proper - ANS-safety equipment.
9 types of personal protection equipment: - ANS-1. body protection
2.head protection
3.respiraatory protection
4.face protection
5.eye protection
6.hearinng protection
7.hand protection
8.foot protection
9.fall protection
During accident prevention the - ANS-hazard mitigation plan is used to anticipate and prevent
accidents
Compliance with quality requirements often equates to compliance with _________________
requirements - ANS-safety
PMs and superintendents set the standards and are responsible for the - ANS-overall safety of
their workers on the job site and all of the materials and machines they must handle
Construction accounts for little more than 20% of what? - ANS-all occupational fatalities
OSHA (occupational safety and health administration) - ANS-the federal agency charged with
developing safety standards and enforcing them through inspection for construction and all
other industries in the U.S.
No construction project should start until a well thought out ___________________ is in place. -
ANS-safety plan
The #1 goal of the safety plan is to - ANS-mitigate hazards and prevent accidents
An effective management plan includes four primary components: - ANS-1. management
commitment
2. job site analysis
3. hazard prevention and control
4. safety and health training
Superintendents set strict rules and must make sure that every one that enters the job site is
provided and wearing the proper - ANS-safety equipment.
9 types of personal protection equipment: - ANS-1. body protection
2.head protection
3.respiraatory protection
4.face protection
5.eye protection
6.hearinng protection
7.hand protection
8.foot protection
9.fall protection
During accident prevention the - ANS-hazard mitigation plan is used to anticipate and prevent
accidents
