nj boat test Exam Questions With Accurate Answers

left - ANSWER -the port side of a vessel is the ____ side rear - ANSWER -the stern of a vessel is the _______ of the vessel displacement and planning - ANSWER -basic types of vessel hulls can be described as round, flat and vee - ANSWER -name three basic hull shapes less than 16ft 16 to less than 26 ft 26 to less than 40ft 40ft to less than 65ft - ANSWER -what are the four length classes of vessels? inboard, outboard, stern drive and jet drive - ANSWER -list the four basic types of engines automotive engines adapted for marine use - ANSWER -stern drive and inboard engines are inboard vessels - ANSWER -the US Coast Guard considers personal watercraft to be False - ANSWER -T/F- personal watercraft are not subject to the laws and requirements of other vessels. impeller - ANSWER -device used to pump and force water under pressure through a steering nozzle at the rear of the vessel 1. capacity in lbs or # of people 2. recommended max. horsepower - ANSWER -what info is displayed on the capacity plate of an outboard powerboat? 1. vessel's description: give #, size, make, etc. 2. #, names and addresses of passengers 3. trip plan - ANSWER -list 3 things that should be included on your float plan before you embark on an extended outing 1. keep the nozzle in contact with the tank opening 2. fill tank slowly and avoid spilling 3. never fill to the brim - ANSWER -name 3 things that you should do while filling the fuel tank of your vessel 1/3 out, 1/3 in and 1/3 in reserve - ANSWER -a rule of thumb to prevent running out of fuel on a PWC is _______ out, ________ in, and _______ in reserve 90% - ANSWER -if the combined weight of the vessel and is engine is more than ________ of the recommended load capacity of the trailer, you should get the next larger trailer. presses down on the towing hitch - ANSWER -"tongue weight" is the amt of the loaded trailer's weight that