3CX Basic | Questions and Correct Solutions Latest Update 2024

3CX Basic | Questions and Correct Solutions Latest Update 2024 An IP phone on network A (for example, 192.168.0.0/24) is started and made known for presence via multicast. Will 3CX display this device on the PHONES page of the 3CX Management Console if it is on Network B (for example, 192.168.1.0/24)? - Answer - NO The installer configures the operating system time zone according to what you selected during the Linux and Windows wizard. - Answer - T The 3CX Client can be installed on computers running Windows, MacOS, Android and iOS operating systems - Answer - T You must set up your own PUSH account to use the 3CX Client on Android. - Answer - NO A DIGITAL RECEPTIONIST can be configured to route calls based on caller voice input. - Answer - F Digital Receptionists have the ability to smartly dial extensions through the CALL BY NAME functionality, where the first 3 letters of the last name must be entered on the phones keyboard - Answer - T All Emergency Numbers must be configured in the 3CX Management Console - Answer - T A supported IP phone can be configured manually by completing each configuration on the web interface of the device, one by one. Is the device still covered by 3CX Support when problems occur with manual configuration? - Answer - NO When adding VoIP providers, you should ensure that firewall verification has run before configuration, without any reported errors - Answer - T SIP ALG must be disabled on your firewall as it UNCONTROLLABLY alters the content within packets that are sent/received - Answer - T A single digital receptionist can handle multiple calls at the same time - Answer - T Using VoIP providers only requires that the forwarded/NAT ports on your firewall be SIP port (default 5060 UDP/TCP) and audio ports (default UDP). - Answer - T Can the 3CX control unit be installed, activated and