NCCER Core Module 1 | Questions and Verified Solutions 2024

NCCER Core Module 1 | Questions and Verified Solutions 2024 Companies with strong safety cultures usually have lower? - Answer -Turnover Poor lighting, excessive noise, and inadequate guards for moving parts are examples of - Answer -unsafe conditions The activity that consists of breaking a job into its component tasks and then analyzing each step for potential hazards is called a _____. - Answer -Job Safety Analysis A measure of the probability, consequences, and exposure related to an event is referred to as _____. - Answer -Risk If there is a hole in the floor of a structure, the preferred method of protecting workers from falls is to _____. - Answer -Cover and mark it The D-ring or support point on a safety harness should be placed _____. - Answer -Between the shoulder blades, middle of your back A personal fall arrest system should be inspected monthly by a _____. - Answer -Competent person Lanyards that have no shock-absorbing features are used for _____. - Answer -Positioning When placing a ladder against a platform or roof, the top of the ladder should extend above the point where the ladder touches the platform or roof by at least _____. - Answer -3 Feet When performing overhead work on scaffolding, what protective measures must be taken to prevent objects from falling and striking a person below? - Answer -toe boards, debris nets, or canopies When stacking materials such as bricks or block, do not stack materials beyond a _____. - Answer -4:1 Ratio Benching systems are prohibited in _____. - Answer -Type C