UNISA 2024 MNO2603-24-S1 Welcome Message Assessment 5
QUIZ
Started on Tuesday, 21 May 2024, 11:39 AM
State Finished
Completed on Tuesday, 21 May 2024, 11:58 AM
Time taken 19 mins 24 secs
Marks 40.00/40.00
Grade 100.00 out of 100.00
Question 1
Correct
Mark 1.00 out of 1.00
_____________ is recognised as the professional body to register occupational health and safety professionals in South Africa.
a. The Board of Safety Professionals
b. The South African Institute for Occupational Safety and Health (SAIOSH)
c. The OSH Act
d. The Institute for Safety Professionals
The correct answer is: The South African Institute for Occupational Safety and Health (SAIOSH)
Question 2
Correct
Mark 1.00 out of 1.00
For the professional designation of GradSaiosh to be awarded, members must comply with the minimum requirement of:
a. An underlying registered qualification (NQF level 6 diploma with 360 credits) and at least 3 years’ postgraduate
practical health and safety workplace experience.
b. An underlying registered qualification (NQF level 7 post graduate diploma or degree) and at least 3 years’
postgraduate practical health and safety workplace experience.
c. An underlying registered qualification (NQF level 7 post graduate diploma or degree) and at least 5 years’
postgraduate practical health and safety workplace experience.
d. An underlying registered qualification (NQF level 5 qualification with 265 credits) and at least 3 years’ postgraduate
practical health and safety workplace experience.
The correct answer is: An underlying registered qualification (NQF level 6 diploma with 360 credits) and at least 3 years’
postgraduate practical health and safety workplace experience.
, Question 3
Correct
Mark 1.00 out of 1.00
A ____________ is an occurrence which could have resulted in injury, damage, or both but did not.
a. Mishap
b. Near-miss
c. Hazard
d. Risk
The correct answer is: Near-miss
Question 4
Correct
Mark 1.00 out of 1.00
A safety programme progresses through five sequential phases. What is the third phase in the life cycle?
a. The concept phase
b. The design, definition or development phase
c. The disposal or termination phase
d. The production phase
The correct answer is: The production phase
Question 5
Correct
Mark 1.00 out of 1.00
During which phase of the life cycle does training start?
a. The concept phase
b. The production phase
c. The disposal or termination phase
d. The operation and deployment phase
The correct answer is: The production phase
QUIZ
Started on Tuesday, 21 May 2024, 11:39 AM
State Finished
Completed on Tuesday, 21 May 2024, 11:58 AM
Time taken 19 mins 24 secs
Marks 40.00/40.00
Grade 100.00 out of 100.00
Question 1
Correct
Mark 1.00 out of 1.00
_____________ is recognised as the professional body to register occupational health and safety professionals in South Africa.
a. The Board of Safety Professionals
b. The South African Institute for Occupational Safety and Health (SAIOSH)
c. The OSH Act
d. The Institute for Safety Professionals
The correct answer is: The South African Institute for Occupational Safety and Health (SAIOSH)
Question 2
Correct
Mark 1.00 out of 1.00
For the professional designation of GradSaiosh to be awarded, members must comply with the minimum requirement of:
a. An underlying registered qualification (NQF level 6 diploma with 360 credits) and at least 3 years’ postgraduate
practical health and safety workplace experience.
b. An underlying registered qualification (NQF level 7 post graduate diploma or degree) and at least 3 years’
postgraduate practical health and safety workplace experience.
c. An underlying registered qualification (NQF level 7 post graduate diploma or degree) and at least 5 years’
postgraduate practical health and safety workplace experience.
d. An underlying registered qualification (NQF level 5 qualification with 265 credits) and at least 3 years’ postgraduate
practical health and safety workplace experience.
The correct answer is: An underlying registered qualification (NQF level 6 diploma with 360 credits) and at least 3 years’
postgraduate practical health and safety workplace experience.
, Question 3
Correct
Mark 1.00 out of 1.00
A ____________ is an occurrence which could have resulted in injury, damage, or both but did not.
a. Mishap
b. Near-miss
c. Hazard
d. Risk
The correct answer is: Near-miss
Question 4
Correct
Mark 1.00 out of 1.00
A safety programme progresses through five sequential phases. What is the third phase in the life cycle?
a. The concept phase
b. The design, definition or development phase
c. The disposal or termination phase
d. The production phase
The correct answer is: The production phase
Question 5
Correct
Mark 1.00 out of 1.00
During which phase of the life cycle does training start?
a. The concept phase
b. The production phase
c. The disposal or termination phase
d. The operation and deployment phase
The correct answer is: The production phase
