Fire and Smoke Restoration Exam Questions and Answers Latest 2024/2025 | Graded A+.

Fire and Smoke Restoration Exam Questions and Answers Latest 2024/2025 | Graded A+. The restoration company works for the property owner, who is the primary customer. A secondary customer is the __________ __________ when the property owner is an __________ (Ans- insurance carrier, insured Smoke and soot particles are visual by-products of __________ __________. (Ans- incomplete combustion Heat, fuel, and oxygen are the key elements required for __________. (Ans- combustions The particle size range of combustion smoke particles is _____, ______ microns. (Ans- .1 , 4 Fire and Smoke Restoration Exam Questions and Answers Latest 2024/2025 | Graded A+ The general categories into which all smoke residues may be places are PAH (Polycyclic Aromatic Hydrocarbons) and __________. (Ans- Soot (PIC's) Particles of Incomplete Combustion Both PAH and soot particles have been reported to be ___________ to humans. (Ans- carcinogenic A very difficult smoke odor for technicians to overcome is the __________ __________ odor, also called "psychological" odor. (Ans- heightened awareness To remove high levels of protein odor from surfaces, ______ __________ is usually required for cleaning protein residues. (Ans- wet cleaning When burned, this material will provide a thick, heavy black smeary residue. (Ans- Synthetic Factors to consider in determining the degree of smoke contamination throughout a structure are the air _______ and ________ generated during combustion. (Ans- pressure, temperature The severity of soot contamination increases with a ________ of oxygen and decreases when a _________ _______ of oxygen is present during the fire. (Ans- lack, greater quantity Some materials and surfaces naturally adsorb more odors than others. The odor control industry refers to them as "__________ _______" (Ans- Natural wicks During a fire, smoke can carry vaporized oils, which eventually settle to leave an _______ ______ on surfaces, which is difficult to remove. (Ans- oily film Lighter plastic surfaces subjected to higher temperatures and soot have protentional to _________ irreversibly. (Ans- yellow From a common sense perspective, safety on the job site is the responsibility of _______________. (Ans- everyone Safety regulations require companies to prepare a hazardous chemical program, issue appropriate safety ___________ to employees, and provide them with safety _________. (Ans- equipment, training Restorers may obtain the most accurate information about potential chemical safety from: ___________ sheets, labels, and ___________. (Ans- safety data , equipment All restoration chemicals must be kept in properly __________ containers and secured on the job site. (Ans- labeled Advise the chemically- sensitive customers to not be ______ the affected areas while work is being performed and ask for their _____ consent of product use. (Ans- in, informed When working for a customer who is chemically _________, there may be need for special air scrubbing, cleaning agents and deodorizing agents. (Ans- sensitive When working in areas containing loose soot residue, it is highly recommended that restorers use appropriate _____ air scrubbers and don ______. (Ans- HEPA, PPE ___________ and ________ are two commonly found invisible safety hazards to be aware of within older structures. (Ans- Lead, Asbestos ________ is a heavy metal that was commonly incorporated into paint formulations. (Ans- Lead ___________ was used in various building materials (siding, roofing, flooring, adhesives) as an insulating and fire-retarding material. (Ans- Asbestos Toxic materials such as lead and asbestos are most likely to be released from painted surfaces into the air during sanding and _____________. (Ans- Demolition The most important PPE to wear when working in environment where toxic particles may exist is a _______ respirator. Engineering controls should also be utilized. (Ans- HEPA If restoration contractors believe a material contains ______ or _____, they should suspend removal and follow local regulations, which typically includes professional testing. (Ans- lead, asbestos The most important asset a technician can have is proper _________. (Ans- Attitude Customers who witness ____________ performed at the beginning of the project are less likely to maliciously complain about pre-existing damage and lost items at project completion. (Ans- documentation The work authorization secures a legal binding agreement between the restorer and the customer with financial responsibility, which is the ________ or __________ ____________. (Ans- insured, property owner Safety issues to watch for in a fire-damages structure include hazards and the building's __________ ____________. (Ans- Structural integrity Hot air laden with smoke particles is attracted to _________ surfaces such as outside walls, glass and metallic surfaces. (Ans- Cold